Publiko produktet
Raychem 460 Pipe Tracing Controller
Raychem 460 Pipe Tracing Controller
Raychem 460 Pipe Tracing Controller
    Chemelex

    Raychem 460 Pipe Tracing Controller

    The Raychem 460 is a c-UL-us Listed single-point heat tracing controller designed for pipe freeze protection, flow maintenance and heat loss replacement applications. It includes a 5" inch color touch screen display for intuitive set up and programming right out of the box. The 460 controller may be used with line-sensing or ambient-sensing and Proportional Ambient-Sensing Control (PASC) modes. It measures temperatures with two 2 KOhm / 77°F (25°C), 2-wire Thermistor connected directly to the unit. The controller can also measure ground fault current to ensure system integrity. The controller includes ground fault current sensing and relaying equipment compliant with UL1053 standard.

    Özellikler
    • Features

      • Simple and fast to install and operate with colored touchscreen for easy navigation
      • Advanced features such as High Temperature cut-out, Autocycle, Event logs for safe and efficient operation
      • Built-in ground fault protection functionality evaluated per UL1053 standard. Easiliy adjustable ground fault alarm and trip settings
      • Flexible and intuitive set-up reduces set-up time
      • USB port for firmware updates, download monitoring reports and remote battery powered setup
      • Built-in Form C Alarm relay with flexible set up for Normally Open/Normally Closed operation

      Specifications

      Alarm Relay: Single Pole Single Throw Relay, Volt-free: Maximum Switching Capacity:1 A @ 24 VDC, 1 A @ 24 VAC

      Ambient Temperature: 32 - 105 °F

      Circuit Breaker: 30 A, Maximum

      Controller Temperature Setting: 32 - 176 °F

      Enclosure Material: Polycarbonate

      Ground Fault Alarm: 20 - 200 mA

      Mounting: DIN Rail

      NEMA Rating: 12

      Output Relay: 24 A @ 120/208/240/277 +/-10% VAC: 50/60 Hz

      Power Consumption, Standby: 9 W

      Sensor Cable Length: 10 ft

      Sensor Temperature Range: -40 °F

      Sensor Tip Diameter: 0.2 in

      Sensor Type: Thermistor 2KΩ @ 77°F (25°C), 2-wire

      Supply Voltage: 120 - 277 V

      Temperature Alarm: 32 - 190 °F

    Teknik özellikler
    • Benzersiz ref.raychem-460-na
    • Ürün ailesiRaychem North America
    • Ürün grubuHeat Tracing - Pipe Freeze Protection; Flow Maintenance
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2020-07-31
    • Baskı numarası1
    • Yükseklik (inç)90
    • Genişlik (inç)210
    • Derinlik (inç)85
    İlgili
    • Ana malzemePolikarbonat
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiElektrik - Controls
    • IFC sınıflandırmasıKontrolör
    • ETIM KoduEC002063
    • ETIM AdıAccessories for heating cables
    • Uniclass 2015 koduPr_75_50_18_26
    • Uniclass 2015 açıklamasıElectric trace heating control and monitoring panels
    • CSI MasterFormat 2014 kodu22 01 10
    • CSI MasterFormat 2014 başlığıOperation and Maintenance of Plumbing Piping and Pumps
    • OmniClass numarası23-31 00 00
    • OmniClass başlığıPlumbing Specific Products and Equipment
    • CSI UniFormat II koduD2090
    • CSI UniFormat II başlığıOther Plumbing Systems

    Bölge bulunurluk durumu

    Kuzey Amerika
    Birleşik Devletler
    Kanada
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin