Z874-12 Trench Drain System (USA Configurable)

Zurn Z874-12 Trench Drain System. High density polyethylene structural composite drain channel with 1.00 Percent bottom slope. All sections modular 80 inch lengths with interlocking ends and radiused bottom. Complete with heavy-duty Dura-Coated steel frame w/ anchor studs at surface, combination anchor tabs/leveling devices at appropriate locations and class C extra heavy-duty ductile iron grate-with 4 stainless steel lockdowns. USA Configurable

Model contains -U4 bottom outlets

Saves labor up to 75%
Rebar clips provided with system for elevation set
4-corner grate lock down for dynamic loading situations
Mechanical interlocking connections

Özellikler

ENGINEERING SPECIFICATION: Zurn Z874-12 Channels shall be 80" long, 17" wide reveal and have a 12" wide throat. Modular channel sections shall be made of 0% water absorbent High Density Polyethylene (HDPE). Shall have a positive mechanical connection between channel sections that will not separate during the installation and shall mechanically lock into the concrete surround every 10". Channels shall weigh less than 6.6 lbs. per linear foot, have smooth 3.5" radiused self cleaning bottom with a Manning's coefficient of .009 and 1.00% or neutral 0% built-in slope. Channels are available with inverts ranging from 9.25" to 34.21". Channel shall have all grates locked down. Channels come with clips attached to the frame to accommodate vertical re-bar for positioning and anchoring purposes. Shall be provided with the standard DGC grate, Zurn 16-1/4" wide Ductile Iron Slotted Grate, which locks down to the frame with 4 individual bolt anchors per grate. Ductile Iron conforms to ASTM specification A536-84, Grade 80-55-06. Ductile Iron grate is rated class C per the DIN EN1433 top load classifications. Supplied in 20" [508 mm] nominal lengths with 13/16" wide slots, and 1-3/4" bearing depth. Grate has an open area of 118 sq. in. per ft. [249779] sq. mm per meter]. The 1/4" thick Carbon Steel Frame Assembly conforms to ASTM specification A36 with 10 - 4" long concrete anchors per 80". The frame is supplied with a powder coated finish. All welds must be performed by a certified welder per ASTM standard AWS D1.1. Frames shall be produced in the USA.

Teknik özellikler

Benzersiz ref.Z874-12
Ürün ailesiLinear Trench Drain Systems
Ürün grubuHDPE
TipObje (Tekil Nesne)
Yayınlanma tarihi2022-07-20
Baskı numarası1
Genişlik (inç)17
Derinlik (inç)80

Bağlantılar

Ürün URL’sihttps://www.zurn.com/products/drainage-interceptors/trench-drain-systems/linear-trench-drain/general-purpose-drainage-exterior/z874-12
Kurulum talimatlarıhttps://files.zurn.com/care-cleaning-install-warranty-sheets/ft754.pdf
Teknik açıklamahttps://files.zurn.com/spec-sheets/z874-12.pdf

İlgili

Ana malzemeHigh-density polyethylene (HDPE)
İkincil malzemeDuctile Iron
Tasarım yeriBirleşik Devletler

Sınıflandırma

BIMobject kategorisiSıhhi tesisat - Drenaj
IFC sınıflandırmasıNesne
Uniclass 2015 koduPr_65_52_24_24
Uniclass 2015 açıklamasıDrainage channels with gratings
CSI MasterFormat 2014 kodu22 14 26.19
CSI MasterFormat 2014 başlığıFacility Trench Drains
OmniClass numarası23-39 29 13 19
OmniClass başlığıSurface Water Drainage Systems
CSI UniFormat II koduD20
CSI UniFormat II başlığıPLUMBING

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları