• GASBETON INCOLLARASA:
IncollaRasa is a white colored masonry mortar with guarantee performance, thin layered (T), M5/M10 class, for interior application. It is a premixed adhesive/coating, made with hydraulic binders having a high and constant quality level. It is realized in a computerized factory and it could be installed manually. IncollaRasa is specific for the anchor and coating of aerated autoclaved cellular concrete (AAC) blocks GASBETON®.
• GASBETON MULTICEM:
GASBETON Multicem is a hydrophobic fiber-reinforced plaster, with low specific weight, made in gessowith natural lime, hydraulic binders and light aggregates. It could be used for internal and external background plasters on aerated autoclaved cellular concrete (AAC) blocks GASBETON®, bricks, concrete bricks etc., having a constant quality level and produced in a computerized factory. GASBETON Multicem could be installed manually or with a plastering machine.
• GASBETON MULTIRASO ESTERNI:
Premixed waterproofed finishing, made with natural lime and hydraulic binders, having a high and constant quality level. It is suitable for the finishing of external surfaces of old and new buildings, installed manually. It doesn’t crack or detach from the support; it is also breathable and impact resistant. It makes the ideal background for superficial coating, like silicate siloxane or acryl-siloxane paints.
• GASBETON MULTIRASO INTERNI:
MULTIRASO Interni is a white colored premixed smoothing plaster, made with air binders, having high and constant quality level. It can be used for finishing of internal surfaces, manually applied. MULTIRASO Interni is suitable for smooth finish of traditional or premixed plasters (made with lime and cement or lime and gypsum) as flat surface smoother like aerated autoclaved concrete blocks and gypsum panels, as wall putty on old masonry (after removing old paint or wallpapers), as patching and as glue for positioning of frames.
• GASBETON MULTIMALT:
MULTIMALT anchoring mortar is a grey colored premixed powder, made with hydraulic binders, selected siliceous sands, synthetic resins and special additives. It should be used in realization of masonry walls made up with aerated autoclaved cellular concrete (AAC) blocks GASBETON.
• GASBETON MALTA ANCORANTE IDRO:
Premeasured hydrophobic anchoring mortar for bedding of the first course of aerated autoclaved cellular concrete (AAC) blocks GASBETON for load-bearing masonry or non-structural masonry (internal or external). It suitable to avoid damp and moisture, without the adoption of waterproofing sheats. Best results can be obtained matching this product with GASBETON IDRO Block, for the realization of the first course of masonry (under AAC, bricks and concrete blocks masonry).
• ADESIVO GASBETON:
Adhesive for the installation of aerated autoclaved concrete (AAC) blocks, realized with a special one component, low expanding, polyurethane-based foam, made for thin layer masonry. It is suitable for the installation of GASBETON® blocks. Its low pressure formulation, ensure stability and avoids masonry deformation during and after installation work.
4.0 
