Playground Pump with rinsing device | Playground Equipment | Water Pump

Technical information

Playground Pump with direct connection
Pump for direct connection to mains water; no underground shaft required for function. Design and materials correspond to the Playground Pump: closed piston suction pump, all top parts made from hot-dip galvanised grey cast iron or stainless steel, cylinder with a liner made of brass alloy and plastic piston (POM).

Crank Handle Pump (alternative design)
Closed piston suction pump; pump and pillar made of stainless steel; cylinder and crank housing, mounting plate, piston rod and drive shaft made of stainless steel; the drive shaft brass bearing is replaceable, fitted with nipple for lubrication; cylinder with a liner made of brass alloy and plastic piston (POM); crank ring made of stainless steel, knob made of plastic material. External thread 1 inch; min. 2.5 bar water pressure, max. 6 bar; water requirement approx. 18 l/min.

• Equipment height: 1.50 m
• Width: 0.35 / 0.67 m
• Weight: 100 kg

Installation information

Surfacing requirements
Surfacing must be ready to take heavy duty bolts. No underground shaft required for function.

It is absolutely essential to disassemble the equipment during the period of frost!

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.

For use in aggressive environments such as salt or chlorine water, the equipment is also available in marine grade steel (V4A).