Exterior Dot-1 Pro Outdoor-Rated, String-Based RGBW LED Dots - Small

Physical

• Pixel dimensions: 45 x 24.8 x 11.2 mm (1.77 x 0.98 x 0.44 in.)
• Pixel dimensions with dome: 45 mm x 25 mm x 22.2 mm (1.77 x 0.98 x 0.87 in.)
• Weight: 2.48 kg (5.47 lbs.) for 100 dots at 115 mm (4.52 in.) spacing, with a 2 m (6.6 ft.) lead-in cable and connector
• Maximum number of pixels per string: 100
• Pixel spacing (pitch):
  • Standard: 115 mm (4.52 in.)
  • Minimum: 115 mm (4.52 in.)
  • Maximum: 2000 mm (48.8 in.)
• Maximum lead-in cable length:
  • Standard: 5 m (196.9 in.)
  • Extended: Up to 10 m using Active Lead-In Cable Extender

Control and Programming

• Control resolution:
  • 16-bit (P3)
  • 8-bit (DMX) control of each color
• Control protocols: Martin P3, Art-Net, sACN
• Protocol detection: Automatic
• DMX Modes: Standard, Extended, Raw, PixelMap (6 pixel modes)
• DMX channels: 6, 12, 4, 3, 21, 39, 75, 150, 300
• Compliance:
  • RDM: ANSI/ESTA E1.20
  • Art-Net: Art-Net 1, 2, 3, and 4 (including RDM over Art-Net)
  • sACN: ANSI E1.31 – 2016
  • Martin P3: P3 System Controller Software 6.1.0 or newer

Optics

• Light source: 1 RGBW LED
• Minimum LED lifetime: 100,000 hours (to >70% luminous output) *
• LED manufacturer: Lumileds
• Binning: Tight color and flux binning
• Calibration: Full Gamut Pixel Calibration
  (*Figure obtained under manufacturer's test conditions at Ta = 25°C)

Photometric Data

• Viewing angle: 140°
• Viewing angle with dome: 180°
• Cut-off angle: 100°
• Luminous intensity:
  • Full @ 6500K: 7 cd (clear front), 1.5 cd (diffused dome)
• Luminous output:
  • Full @ 6500K: 18 lm (clear front), 7 lm (diffused dome)
  • Red: 6 lm (clear front), 2.5 lm (diffused dome)
  • Green: 18 lm (clear front), 6 lm (diffused dome)
  • Blue: 4 lm (clear front), 1.5 lm (diffused dome)
    (*All photometric data measured in steady state after a 30-minute warm-up at 25°C.)

Construction

• Dot: Clear polycarbonate, black silicone filled
• Diffuser dome: White translucent polycarbonate
• Interconnecting cable: 6 x 20 AWG, black
• Minimum cable bend radius: 15 mm (0.59 in.)
• Protection rating: IP67
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance:
  • 1.0g Sinusoidal (IEC 60068-2-6)
  • 0.7g RMS Random (IEC 60068-2-64)
  • 3.0g (ANSI C136-31)

Installation

• Mounting points: Mounting bracket, mounting profile, four integrated mounting holes for cable ties
• Orientation: Any
• Connections: Power & data input via custom 8-pin IP67-rated connector

Electrical

• Power and data converter: Exterior AC-Feeder or DC-Feeder
• Operating voltage: 15 VDC
• Power consumption:
  • Maximum: 1.0 W per dot
  • Typical: 0.33 W per dot
  • Idle: 0 W per dot
    (*Measurements made at nominal voltage with ±10% deviation.)

Thermal

• Cooling: Convection
• Operating temperature range:
  • Maximum: 55°C (131°F)
  • Minimum: -30°C (-22°F)
• Heat dissipation:
  • Peak: 3.4 BTU/hr (full intensity, full white)
  • Typical: 1.4 BTU/hr (video content)

Environmental

• Compliance: RoHS, REACH, WEEE, Proposition 65
• Efficacy (max output): 15 lm/W
• LWR (Lumen-to-Weight Ratio): 604 lm/kg (274 lm/lb)
• Packaging: FSC-certified cardboard

Approvals

• Global: CB Certification/IECEE (EC 62368-1)
• EU: EN62638-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3
• US: UL 62638-1, 47 CFR Part 15 Class A
• Canada: CSA C22.2 No. 60238-1
• Australia/NZ: RCM
• UK: UKCA
• India: BIS IS 10322 (Part5/section7)

Related Items

• Exterior AC-Feeder: P/N MAR-90580003
• Exterior DC-Feeder: P/N MAR 90580004
• Martin P3 PowerPort 2000: P/N MAR-90721200
• Martin P3 PowerPort 500 IP (Rental): P/N MAR-90721201
• Martin P3 PowerPort 500 IP (Install): P/N MAR-90721202
• Martin DCE PSU 240 IP: P/N MAR-90721203
• DCE DataSplitterBooster IP: P/N MAR-90721204
• Martin P3 System Controllers:
  • P3-175: P/N MAR-90721100
  • P3-275: P/N MAR-90721101
  • P3-PC: Free download
• Martin Companion Software: Free download

Accessories

• Glare kits: Grey (P/N MAR-90580005), Black (P/N MAR-90580029), set of 10
• Dome kits: Grey (P/N MAR-90580011), Black (P/N MAR-90580014), set of 10
• Mounting brackets: Grey (P/N MAR-90580008), Black (P/N MAR-90580032), set of 10
• Mounting profile: 2 m (P/N MAR-90580017)
• End caps for mounting profile: Set of 2 (P/N MAR-90580026)
• Loose ribbon cable (10 m): P/N MAR-90580022
• Active Lead-In Cable Extender (5 m): P/N MAR-90580023
• Double string cable adapter: P/N MAR-90580024
• String termination caps: Set of 2 (P/N MAR-90580021)
• Splice connectors: Set of 3 (P/N MAR-90580020)

Ordering Information

• Exterior Dot-1 Pro: 115 mm, 100 pcs, 2 m lead (P/N MAR-90580000)
  (*Other configurations available upon request.)