LiteTouch to DIN Retrofit Subplate

Features

• Retrofit subplate comes with a DIN mounting plate

for up to 8 DPMs, panel cover, QS wire landing

board (QS-WLB) and QS link wiring harness

(PDW-QS-8) for easy installation.

• Subplates come ready to install DPMs (sold separately).

• Subplate can house these DPMs:

– LQSE-4S8-120-D – LQSE-4M-120-D

– LQSE-4T5-120-D – LQSE-4A5-120-D

– LQSE-2HDC-D

• Note: Reference the specification for each DPM to

ensure proper application. See Lutron application note

#817 (P/N 048817) at www.lutron.com for a list of

LiteTouch modules and recommended Lutron DPMs.

• Note: Modules not included in the list above should

not be installed on the subplate and should be installed

within a separate Lutron DIN enclosure.

• Used exclusively with the LiteTouch four-module

enclosure: 37 in H x 20 in W x 4 in D

(940 mm H x 508 mm W x 102 mm D)

• Can be used in HomeWorks systems.

• Extensively tested to ensure optimal thermal performance

with maximum load in 32 °F to 104 °F (0 °C to 40 °C)

ambient environment.

• Allows for field wiring to remain intact to reduce

installation time.

• Rated for 120 V~ applications.