ASSA ABLOY LH6080L heavy duty stand alone loadhouse
| Unique ref.: | cra_6080_l |
|---|---|
| Brand: | ASSA ABLOY Entrance Systems |
| Product family: | Docking |
| Product group: | Loadhouse |
| Date of publishing: | 2017-08-29 |
| Edition number: | 1 |
| Type: | Object (single object) |
The ASSA ABLOY LH6080L heavy duty stand alone loadhouse from ASSA ABLOY Entrance Systems is the heavy duty version of the of load houses, especially developed to meet all requirements of architects, builders and operators. It is suitable for all geographical areas with snow load up to 2,0 kN/m² and our static calculations are certified by a third party. The ASSA ABLOY LH6080 is the safe and reliable choice including ideal support for the construction planning and building permission process.
The LH6080L Loadhouse is a housing that together with the Autodock loading platform forms a complete loading unit for attachment to the building.
The complete loading unit is finished off with a sectional door in the outside wall of the building and a dock shelter on the front of the loadhouse.
Crawford
The LH6080L Loadhouse is a housing that together with the Autodock loading platform forms a complete loading unit for attachment to the building.
The complete loading unit is finished off with a sectional door in the outside wall of the building and a dock shelter on the front of the loadhouse.
Crawford
• Loading bay without thermal bridges. Full thermal separation between interior and exterior. Suitable for new builds and retrofitting.
• Dock leveller optionally as swingdock with swing lip or teledock with lip extension. Dock shelter optionally mechanical with PVC curtains or inflatable with bags in PVC. Sectional door optionally manual or electric.
• Modular design consisting of 2 wall elements and 1 roof element.
• Roof slope with an angle of 4° from rear to front
• The entire steel frame construction is hot-dipped galvanised.
• Self-supporting construction with proven statics.
• Steel construction designed in accordance with DIN 18800
• Assumed loads in accordance with DIN 1055 Section 4
• Basic wind load: 0,84 kN/m², Eurocode 3
• Basic snow load: 2,00 kN/m², Eurocode 3
• Accumulated snow load: 3,50 kN/m², Eurocode 3
Dimensions (width / length):
• Nominal length: 2000, 2450, 3000 mm
• Nominal width: 3300, 3500, 3600, 3750 mm
• Angular adjustment: 90°
Dimensions (length / height):
Total Height > TH*
NL 2000 NL 2450 NL 3000
DH
950 3880 3910 3950
1000 3830 3860 3900
1050 3780 3810 3850
1100 3730 3760 3800
1150 3680 3710 3750
1200 3630 3660 3700
1250 3580 3610 3650
1300 3530 3560 3600
1350 3480 3510 3550
1400 3430 3460 3500
1450 3380 3410 3450
1500 3330 3360 3400
* Measurement only valid for insulated wall setup. For uninsulated wall setup TH is 60mm less. When the loadhouse is supplied with rain pipe and gutter add 100mm.
Cladding:
Type HU - Uninsulated cladding with profiled galvanized sheeting, 0,6 mm profiled steel sheet.
Type HI – Cladding with ISO panel thickness 40mm, steel sheet galvanized
Type HX - Steel frame construction without cladding
Self-supporting design with reinforcements suitable for onsite cladding
Angular adjustment:
90° to building (standard)
45° to building
135° to building
Standard paints:
Type HMU with profiled sheeting
RAL 1015 / RAL 3000 / RAL 5010 / RAL 6005 / RAL 6011 / RAL 6020 / RAL 7016 / RAL
7032 RAL 7035 / RAL 8004 / RAL 8011 / RAL 8012 / RAL 9002 / RAL 9006 / RAL 9007 /
RAL 9010
Type HMI with ISO panel
RAL 1015 / RAL 7035 / RAL 9002 / RAL 9006 / RAL 9007 / RAL 9010
Options:
Drainpipe and gutter in galvanized finish
Wall protection interior in veneer plywood up to a height of 1200 mm
Roof section interior with anti-drip coating, only for HU design with profiled sheeting
• Dock leveller optionally as swingdock with swing lip or teledock with lip extension. Dock shelter optionally mechanical with PVC curtains or inflatable with bags in PVC. Sectional door optionally manual or electric.
• Modular design consisting of 2 wall elements and 1 roof element.
• Roof slope with an angle of 4° from rear to front
• The entire steel frame construction is hot-dipped galvanised.
• Self-supporting construction with proven statics.
• Steel construction designed in accordance with DIN 18800
• Assumed loads in accordance with DIN 1055 Section 4
• Basic wind load: 0,84 kN/m², Eurocode 3
• Basic snow load: 2,00 kN/m², Eurocode 3
• Accumulated snow load: 3,50 kN/m², Eurocode 3
Dimensions (width / length):
• Nominal length: 2000, 2450, 3000 mm
• Nominal width: 3300, 3500, 3600, 3750 mm
• Angular adjustment: 90°
Dimensions (length / height):
Total Height > TH*
NL 2000 NL 2450 NL 3000
DH
950 3880 3910 3950
1000 3830 3860 3900
1050 3780 3810 3850
1100 3730 3760 3800
1150 3680 3710 3750
1200 3630 3660 3700
1250 3580 3610 3650
1300 3530 3560 3600
1350 3480 3510 3550
1400 3430 3460 3500
1450 3380 3410 3450
1500 3330 3360 3400
* Measurement only valid for insulated wall setup. For uninsulated wall setup TH is 60mm less. When the loadhouse is supplied with rain pipe and gutter add 100mm.
Cladding:
Type HU - Uninsulated cladding with profiled galvanized sheeting, 0,6 mm profiled steel sheet.
Type HI – Cladding with ISO panel thickness 40mm, steel sheet galvanized
Type HX - Steel frame construction without cladding
Self-supporting design with reinforcements suitable for onsite cladding
Angular adjustment:
90° to building (standard)
45° to building
135° to building
Standard paints:
Type HMU with profiled sheeting
RAL 1015 / RAL 3000 / RAL 5010 / RAL 6005 / RAL 6011 / RAL 6020 / RAL 7016 / RAL
7032 RAL 7035 / RAL 8004 / RAL 8011 / RAL 8012 / RAL 9002 / RAL 9006 / RAL 9007 /
RAL 9010
Type HMI with ISO panel
RAL 1015 / RAL 7035 / RAL 9002 / RAL 9006 / RAL 9007 / RAL 9010
Options:
Drainpipe and gutter in galvanized finish
Wall protection interior in veneer plywood up to a height of 1200 mm
Roof section interior with anti-drip coating, only for HU design with profiled sheeting
| Product url: | http://www.assaabloyentrance.co.uk/en/aaes/assaabloyentrancecouk/products/... |
|---|---|
| Installation instructions: | http://www.assaabloyentrance.co.uk/en/aaes/assaabloyentrancecouk/products/... |
| COBie Product Data Sheet: | |
| Product certification: | http://www.assaabloyentrance.co.uk/en/aaes/assaabloyentrancecouk/products/... |
| Technical description: | http://www.assaabloyentrance.co.uk/en/aaes/assaabloyentrancecouk/products/... |
| Instruction video: | https://www.youtube.com/watch?v=5kkAjvth_dk |
| GTIN code: |
The Qr code includes the static URL below and will bring you back to this page if scanned by a device like iPhone or smartphone
https://www.bimobject.com/en-us/assa-abloy-entrance/product/cra_6080_l
| Material main: | |
|---|---|
| Material secondary: | |
| Designed in: | Sweden |
| Manufactured in: | Sweden |
| BIMobject Category: | Loading Equipment - Loadhouses |
|---|---|
| IFC classification: | Door |
| UNSPSC name: | Load centers |
| UNSPSC code: | 39121101 |
| Uniclass 1.4 Code: | L21248 |
| Uniclass 1.4 Description: | Loading bay equipment |
| Uniclass 2.0 Code: | SS-25-30-20-45 |
| Uniclass 2.0 Description: | Loading Bay Systems |
| NBS Reference Code: | 25-30-20-45 |
| NBS Reference Description: | Loading Bay Systems |
This product is available in:
Africa
- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cameroon
- Cape Verde
- Central African Republic
- Chad
- Comoros
- Côte d'Ivoire
- Democratic Republic of the Congo
- Djibouti
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Ghana
- Guinea
- Guinea-Bissau
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Mayotte
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Republic of the Congo
- Reunion
- Rwanda
- Saint Helena
- São Tomé and Príncipe
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- South Sudan
- Sudan
- Swaziland
- Tanzania
- The Gambia
- Togo
- Tunisia
- Uganda
- Western Sahara
- Zambia
- Zimbabwe
Europe
- Åland Islands
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Guernsey
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Jersey
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia (FYROM)
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Svalbard and Jan Mayen
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Vatican City
Middle East
- Afghanistan
- Bahrain
- Egypt
- Iran
- Iraq
- Israel
- Jordan
- Kuwait
- Lebanon
- Oman
- Palestine
- Qatar
- Saudi Arabia
- Syria
- Turkey
- United Arab Emirates
- Yemen
All BIM objects are real products from real manufacturers confirmed and approved