Publique sus productos
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
    DELABIE
    Archivados

    2641S Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Mechanical sequential mixer: opens and closes on cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm classic ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed of the water reduces the development of biofilm. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset standard wall connectors M1/2" M3/4". Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for Healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Especificaciones técnicas
    • Referencia2641S
    • Familia de productoSanitary
    • Grupo de productosBasin mixer
    • TipoObjeto (objeto simple)
    • Día de publicación2021-05-31
    • Número de edición1
    • Altura (mm)175
    • Ancho (mm)215
    • Profundidad (mm)278
    Información relacionada
    • Material principalBronce
    • Diseñado enFrancia
    • Fabricado enFrancia
    • Peso Neto (kg)1781
    Clasificación
    • Categoría BIMobjectSanitarios - Grifos y llaves de baño
    • Clasificación IFC Terminal sanitario
    • Código ETIMEC011328
    • Nombre ETIMWashbasin mixing tap
    • Código Uniclass 2015Pr_40_20
    • Descripción Uniclass 2015Sanitary fittings and accessories
    • Número OmniClass23-31 11 00
    • Título OmniClass Faucets
    Common.Footer.ValueProp.Image.AltText

    Aplicación de diseño para Revit

    Cargue familias directamente en su modelo de Revit con un solo clic

    Obtenga un lugar para acceder a nuevos objetos más fácilmente, almacene sus familias de Revit y colabore con su equipo.

    • Marca de verificaciónTrabaje directamente con los objetos BIM junto a Revit
    • Marca de verificación 2GB de almacenamiento en la nube: almacene su contenido de Revit
    • Marca de verificación Obtenga el LCA de carbono incorporado (A1-A3) directamente desde Revit