Julkaise tuotteesi
MI-DU Distribution Unit
MIFAB

MI-DU Distribution Unit

MIFAB® Series MI-DU trap seal primer distribution unit is engineered to receive a metered amount of water from a trap seal primer and distribute the water equally to either two, three or four floor drain traps. Choose from either 1/2" or 5/8" compression connections by indicating suffix (-500) or 1/2" or suffix (-625) for 5/8". The lid of the distribution unit has the numbers 2", 3" and 4" marked on it. The body of the distribution unit has a guide marker on the top of the body. The numbers and the guide marker are positioned by removing the three screws in the lid of the unit and rotating the lid to match the appropriate numbers with guide marker to provide priming for the desired number of drains. The underside is marked with numbers 1-4 for ease in determining which ports will receive the water. Do not over torque the three lid screws when securing the lid back to the body. It is not necessary to install MIFAB’s distribution perfectly level. The unique design will distribute water uniformly when out of level up to 5 degree.
Tekniset tiedot
  • SKUs: MI-DU-500, MI-DU-625
Tekniset tiedot
  • Yksilöity viitemi-du-500-distribution-unit
  • TuoteperheTrap Seal Primers
  • TuoteryhmäOther
  • TyyppiDokumentaatio (ainoastaan tiedot)
  • Julkaisupäivä2021-02-26
  • Painoksen numero1
Liittyviä
  • Suunniteltu:Yhdysvallat
  • Valmistettu:Yhdysvallat
Luokitus
  • BIMobject-luokkaPutkityöt - Vedenpoisto

Alueellinen saatavuus

Pohjois-Amerikka
Yhdysvallat
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Lataa perheet suoraan Revit-malliisi yhdellä napsautuksella

Hanki paikka, jossa voit käyttää uusia objekteja helpommin, tallentaa Revit-perheesi ja tehdä yhteistyötä tiimisi kanssa.

  • ValintamerkkiTyöskentele suoraan BIM-objektien kanssa Revitin vieressä
  • Valintamerkki 2 Gt pilvitallennustilaa – tallenna Revit-sisältösi
  • Valintamerkki Hanki sisällysluettelon hiilijalanjälkilaskenta (A1–A3) suoraan Revitistä