Prestotem 2 Touch mitigeur thermostatique douche temporisé tactile

> Working pressure :

• 1 to 5 bar

> Flow rate:

• 6l/min with integrated flow limiter
• Anti-water-hammering device
• Fixed shower head with anti-limescale spikes

> Flow time:

• 30 seconds (adjustable from 1 sec to 5 min) and Start/Stop function
• Adjustable duration and frequency of the "duty flush" function

> Hydraulic supply :

• G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026.
• PRESTO TOUCH® tapware and EN 1111 thermostatic mixer tap (NF check valves)

> Power supply:

• 6 V Lithium battery type CRP2 in a case integrated inside the panel

> Material :

• Anodised aluminium extruded section (2.5mm thickness)
• Aluminium removable valve plate, peinted RAL 7005 colour
• High resistance RAL 7005 coloured ABS covers

> Functioning:

• Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate.

> Thermal resistance :

• Resistant to a temperature of 70°C during 30 minutes (for 20 cycles) in case of thermal shocks

> Security :

• ANTI-SCALDING SAFETY : flow is immediately stopped if the cold water or hot water is cut off, compliant to French norm EN1111. Integrated temperature switch limiter, pre-fixed 38°C maximum.
• Possibility to parameter the periodical flushing in term of frequency or flow time, limiting bacterium growth.
• The solenoid valve closes automatically if the battery runs out or the sensor is damaged

> Delivered with:

• 1/2" hoses with revolving nuts
• MM 1/2" (15x21) straight stop valves and 250 micron filters
• Fastening screws
• Instruction manual

> Standards & approvals :

• Brass body in accordance with EN 1982, EN 12164, EN 12165
• Chrome-plated surface treatment in accordance with EN 12540
• 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227