FRP reinforcement Kimitech VR system

Kimitech VR are unidirectional fiberglass reinforcement fabrics with a grammage of 300 g/sqm, specific for structural interventions. Kimitech VR 300 fabrics are used to consolidate reinforced concrete, wood and masonry elements and reinforcements of reed-and-plaster vaults.

사양

Repair, reinforcement, or seismic retrofitting of concrete and masonry structures using an FRP system equipped with a CVT. The process includes the following application steps: cleaning the substrate, completely removing any loose parts, rounding any edges, and filling any cracks with suitable mortars. Application on the treated surface of a primer based on two-component synthetic resin in water dispersion Kimicover FIX by Kimia S.p.A. or similar product. Apply a bonding layer of Kimitech CMP epoxy resin by Kimia S.p.A. or a similar product, using a brush or roller, directly onto the substrate. Apply Kimitech VR glass fiber fabric of the chosen weight and texture while still fresh. Impregnation is performed while still fresh with Kimitech CMP two-component, solvent-free epoxy resin by Kimia S.p.A. or a similar product, applied in several coats using a brush or roller. The bonding and impregnation resin must have the following characteristics: frost time: 25 minutes; complete cure at 25°C: 7 days; compressive strength after 7 days ASTM D695-02a: > 50 MPa; maximum tensile stress ASTM D 638: > 30 MPa; tensile modulus ASTM D 638: 1760 MPa. The product will be CE marked as a structural bonding product according to EN 1504-4. The strengthening system thus created will have a CVT and will fall within the identification classes according to the qualification procedures for strengthening systems created on site in point 5.2 of the “Guidelines for the identification, qualification and acceptance control of fiber-reinforced polymer matrix (FRP) composites to be used for the structural strengthening of existing buildings”. The supply and installation of all the materials described above and anything else needed to complete the work are included, excluding anchors which are calculated separately.

기술 사양

특징 참조frp-kimitech-vr
유형개체 (단일 개체)
게시일2026-04-13
에디션 넘버1

링크

제품 URLhttps://www.kimia.it/en/pultruded-and-reinforcing-fabrics/kimitech-vr-300

관련성

주 재료Glass fibre
설계국가이탈리아
제조국가이탈리아

분류

BIMobject 카테고리건축 자재 - 강화

지역 가용성

유럽
건지
그리스
네덜란드
노르웨이
덴마크
독일
라트비아
러시아
루마니아
뤽상부르
리투아니아
리히텐슈타인
맨섬
모나코
몬테네그로
몰도바
몰타
바티칸 시국
벨기에
벨로루시
보스니아 헤르체고비나
북마케도니아
불가리아
산마리노
세르비아
스발바르 얀마옌 제도
스웨덴
스위스
스페인
슬로바키아
슬로베니아
아이슬란드
아일랜드
안도라
알바니아
에스토니아
영국
오스트리아
올란드 제도
우크라이나
이탈리아
저지섬
지브롤터
체코 공화국
크로아티아
키프러스
페로 제도
포르투갈
폴란드
프랑스
핀란드
헝가리