Opublikuj swoje produkty
Wind-Driven Rain Resistant Stationary Louver EME6325D
Ruskin

Wind-Driven Rain Resistant Stationary Louver EME6325D

The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
Tested to the following FBC/Miami Dade County Test protocols
TAS-100A Wind Driven Rain Test
TAS-201 Large Missile Impact Test
TAS-202 Uniform Static pressure 
TAS-203 Cyclic Pressure Test
Miami DADE NOA #20-1201.04
 Approved for locations up to 33 ft. above grade for "dry" room locations.
AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
AMCA Certified Air and Water Penetration.
Aluminum clip angle installation.

Opis
  • The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

    • AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
    • Tested to the following FBC/Miami Dade County Test protocols
    • TAS-100A Wind Driven Rain Test
    • TAS-201 Large Missile Impact Test
    • TAS-202 Uniform Static pressure 
    • TAS-203 Cyclic Pressure Test
    • Miami DADE NOA #20-1201.04
    •  Approved for locations up to 33 ft. above grade for "dry" room locations.
    • AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
    • AMCA Certified Air and Water Penetration.
    • Aluminum clip angle installation.

Specyfikacja techniczna
  • Nr referencyjnyruskin-007
  • Rodzina produktuFixed Exterior Louvers and Grilles
  • Grupa produktuHurricane Louvers
  • TypObiekt (jeden obiekt)
  • Data publikacji2011-12-01
  • Numer edycji1
Klasyfikacja
  • Kategoria BIMobjectDrzwi - Żaluzje

Dostępny w krajach:

Ameryka północna
Stany Zjednoczone
Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

  • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
  • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
  • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit