Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal CapacityMaster-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity
Просмотр предыдущих изображений
Просмотр следующих изображений
A. O. Smith

Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity

The Master-Fit® BTR series with automatic flue damper provides outstanding performance and maximum installation flexibility for both new construction and replacement applications. Multiple options for placement of water connections and low installation clearances are additional installer-friendly features.
  • Effikal automatic flue damper minimizes standby heat loss to achieve 80% thermal efficiency
  • Inlet/outlet connections located top, front and rear for greater installation flexibility
  • Space-saving units are up to one foot shorter than models they replace
  • Installs standalone, manifolded or connected to storage tanks
Cпецификация
  • (Natural or Propane) gas water heater(s) shall be A. O. Smith Master-Fit® model # _____________ or equal, with a storage capacity of __________ gallons, an input rating of ___________________ BTUs per hour, a recovery rating of_________ gallons per hour (gph) at 100ºF rise and a maximum hydrostatic working pressure of 160 psi. Water heater(s) shall be protected against overheating caused by the buildup of scale, film and other sediment by a self-cleaning device, positioned inside the tank so that it directs the flow of inlet water to keep precipitated solids in suspension so that they are removed from the water heater on that or successive draws. Glasslined water heater(s) shall also be protected against electrolytic corrosion by multiple factory-installed anode rods. In addition, water heater(s) shall: 1) Be equipped with an integrated control system consisting of a 180ºF adjustable thermostat with upper and lower sensing bulbs. 2) Be equipped with intermittent electronic ignition, a manual reset gas shutoff device, a gas pressure regulator, factory-installed, CSA Certified and ASME Rated T&P relief valve and 2-3/4˝ x 3-3/4˝ tank inspection port. 3) Be design-certified by UL (Underwriters Laboratories) to current edition of ANSI Z.21.10.3 - CSA 4.3 standards governing storage-type water heaters. 4) Meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and Current Edition of ASHRAE/ IESNA 90.1. 5) Have a 3-year limited warranty against corrosion as outlined in the written warranty.
Техническая спецификация
  • Уникальная ссылкаaosmith-btr
  • Тип продукцииStorage Water Heaters
  • Группа продукцииMaster-Fit
  • ТипОбъект (один объект)
  • Дата публикации2017-10-16
  • Номер версии1
Связанные
  • Основной материалСталь
  • Разработано вСоединенные Штаты Америки
  • Страна-производительСоединенные Штаты Америки
Классификация
  • Категория BIMobjectВентиляция и кондиционирование воздуха - Водонагреватели
  • Код Uniclass 2015Pr_60_60_96_34
  • Описание Uniclass 2015Gas-fired storage water heaters
  • Код CSI MasterFormat 201422 34 36
  • Заголовок CSI MasterFormat 2014Commercial Gas Domestic Water Heaters
  • Номер OmniClass23-31 29 13 13

Доступно в регионах:

North America
Ангилья
Антигуа и Барбуда
Аруба
Барбадос
Белиз
Бермуды
Британские Виргинские острова
Канада
Бонэйр
Острова Кайман
Сен-Мартен
Коста-Рика
Куба
Кюрасао
Доминика
Доминиканская Республика
Сальвадор
Гренландия
Гренада
Гваделупа
Гватемала
Гаити
Гондурас
Ямайка
Мартиника
Мексика
Монтсеррат
Никарагуа
Панама
Пуэрто-Рико
Сент-Китс и Невис
Сент-Люсия
Сен-Пьер и Микелон
Сент-Винсент и Гренадины
Сен-Бартелеми
Синт-Мартен
Багамы
Тринидад и Тобаго
Острова Теркс и Кайкос
Виргинские Острова
Соединенные Штаты Америки