X-WALL Trap

X-WALL 30

Shower wall trap "Valsir X-Wall 30" consisting of a body in ABS and waterproofing sheet in PP / TPE / PP, removable water plug, anti-hair grid and protective cap in EPS.

Minimum installation height (with finished screed) 69.5mm, hydraulic connection on the right and / or left side with a diameter of 40 mm. The trap is equipped with a connection for the condensation drain of the air conditioning system, diameter 32mm, that is hydraulically disconnected from the waste system so there is no possibility of foul-smelling odours back flow in the bathroom.

Drainage flow rate of 0,6 l / s in accordance with PrEN 1253-6 and hydraulic seal of 30 mm which guarantees a resistance of 290 Pa in accordance with PrEN 1253-6.

Available with cover plate in satin or polished stainless-steel measuring 330x100mm with a thickness of 3mm and adjustable, depending on the coating used, up to 55mm beyond the body of the manhole.

X-WALL 50
Shower wall trap "Valsir X-Wall 50" made of a body in ABS with a pre-assembled waterproofing sheet in PP / TPE / PP, removable water plug, anti-hair grid and a protective cap in EPS.

Minimum installation height (with finished screed) 89.5mm, hydraulic connection on the right and / or left side with a 50mm diameter. The trap is equipped with a connection for the condensation drain from the air conditioning system, 32 mm diameter, that is hydraulically disconnected from the waste system so there is no possibility of foul-smelling odours back flow in the bathroom.

Drainage flow rate of 0.8 l/s, in accordance with EN 1253-1 and EN 274, and a 50 mm hydraulic seal that guarantees a pressure resistance up to 424 Pa, in compliance with EN 1253-1.

Available with cover plate in satin or polished stainless-steel measuring 330x100mm with a 3 mm thickness, that is adjustable, according to the coating used, up to 55mm beyond the body of the trap.