Oberon™ In-Plane™ Recessed Mounts 1042

Features & Benefits

• Install and conceal APs and antennas from most vendors into existing construction hard ceiling environments
• AP and antennas mount flush to the ceiling, providing an aesthetic, professionally installed appearance
• Easy to install, no lose hardware

Technical Specifications

• Design: Economical, recessed hard ceiling installation kit for APs and antennas. For pre-existing drywall, sheetrock, gypsum board ceiling (remodeling or old construction). AP mounts in interchangeable bracket and trim, providing a professional finish. (Model 1042-FL and -FLRD only: AP mounts inside recessed box, and ABS plastic cover fastens to recessed box with torsion springs, providing a low profile, professional finish). Designed for all leading vendors’ APs and antennas, as identified in specifications
• Performance: UL listed for low voltage applications, and designed to meet NEC300-22 and 300-23 for plenum installations. De-rate AP operating temperature range by 10°C when mounted in enclosure
• AP/antenna bracket and trim is interchangeable for other APs or antennas, without removing back-box. Trim attaches with torsion spring
• Model 1042-FL and -FLRD only: ABS plastic cover is paintable and is virtually transparent to wireless signals. Plastic covers are interchangeable with other Oberon vendor specific AP trims
• Model 1042-ANTMNT only: White powder coated steel antenna mounting plate. 1 in. knockouts for up to five ceiling mounted antennas from most vendors. Also can be used as a temporary blanking plate
• Firestop grommet for insertion into back-box, large enough for 2 Cat6A cables
• 1 in. trade size knockouts in two walls
• Adjustable hanger wire to support enclosure and installed equipment independent of the ceiling system
• Swivel fasteners secure enclosure into pre-existing hard ceiling panels .75 inch thick or less
• Solid back-box fills opening behind AP, creating an effective fire, smoke and dust barrier to simplify ICRA compliance
• Construction: 20 ga. galvanized steel back-box, white powder coated steel trims. Model 1042-FL and -FLRD only: UL 94-5VA ABS Plastic cover
• Constructed to be compliant with City of Chicago Environmental Air (CCEA) plenum requirements
• Maximum weight inside enclosure is 25 lbs.
• Size: Back-box is 11 x 11 x 3 in. (280 x 280 x 76 mm). -FL Cover: 13.5 in. x 13.5 in. -FLRD Cover: 16.5 in. round
• Suitable for both North American and European (metric) ceilings
• Made in the USA