SinoCore® 1PC Moldings Wall Panel

Impact Resistant Exterior Wall

These budget-friendly systems offer quick lead times, on-site fabrication, as well as a number of different core options to suit your specific application.

Features & Benefits

‍4mm Polypropylene Panel
7/16″ System Depth
Barrier Wall
Low-Profile Moldings
Progressive Sequence
Lightweight

Specifikim

Code Tested:
- Panel: ASTM E84 (Flame Spread)
Panel Composition: 5 -Year Panel Warranty
- .010″ Textured Aluminum or .024″ Smooth Aluminum Face
- 4mm Polypropylene
- .010″ Primed Aluminum Back
Panel Thickness: 4mm (nominal)
- A fluted, high density polypropylene core makes this a lightweight cladding option.
System Depth: 7/16 in.
- Measured from the face of the substrate to the face of the moldings.
Panel Weight: 0.58 to 0.77 lb./sq. ft.
Standard Sizes:
- 48″ x 96″ (121.9cm x 243.8cm)
- 48″ x 120″ (121.9cm x 304.8cm)
- 48″ x 144″ (121.9cm x 365.8cm)
- 60″ x 96″ (152.4cm x 243.8cm)
- 60″ x 120″ (152.4cm x 304.8cm)
- 60″ x 144″ (152.4cm x 365.8cm)
Finishes/Finish Warranty:
- Kynar 500® Finish: 30 Years (Pre-finished standard colors/coil-coated)
- Anodized Finish: 20 Years
- Polyester: 5 Years
Recycled Content by Weight:
- Panels With Textured Skins
  - Post-Consumer: 1.0%
  - Post-Industrial: 23.0% to 26.8%
- Panels With Smooth Skins
  - Post-Consumer: 0.8%
  - Post-Industrial: 33.4% to 36.3%
Wall Design: Barrier
- This system is designed to be completely sealed to keep all moisture away from the structure.
- One-piece, low-profile aluminum moldings capture the panel edge and fit close to the face (Reveal or Batton)