B-Series CBT Bypass Isolation Transfer Switch
Cummins

B-Series CBT Bypass Isolation Transfer Switch

The B-Series bypass-isolation transfer switches combine a draw-out automatic transfer switch with isolation mechanism and a manual bypass transfer switch, to provide redundant power transfer and re-transfer capability where reliable power is paramount to the safety and vitality of our communities. These products are specifically designed to provide a convenient and robust means to satisfy the NFPA 70 Article 700 and 708 requirements for redundant transfer equipment.

The B-Series transfer switches are designed for operation and switching of electrical loads between primary and alternate power sources. They can be used in utility-generator set, utility-utility, generator set-generator set, or three- source system (dual standby) application types.

The B-Series transfer switches are suitable for use in emergency, legally required and optional standby applications. The integral automatic transfer switch control monitors both power sources, signals the generator set to start and automatically transfers the load to the alternate power source. When the preferred power source returns and has stabilized, the load is automatically transferred back.

The B-Series integral automatic transfer switches are available in closed transition operations. By briefly paralleling the two sources (for 100 ms or less), the transfer from the alternate source back to the normal source occurs without power interruption to the loads.

Specifikim
  • Withstand and Closing Ratings (WCR) – The B-Series transfer switches have the highest UL1008 0.05 s (3 cycle) and 0.5s (30-cycle) Time Duration ratings in the industry. The high ratings provide the freedom to use any upstream overcurrent protective device to protect the transfer switch which vastly simplifies the task of power system selective coordination.

    PowerCommand® 80 control – A sophisticated, fully featured microprocessor-based control with LED backlit colored LCD display and tactile-feel soft-buttons for easy screen navigation and operation with gloves and in rain.

    3 - Position mechanism – The 3-position mechanism allows for independent source actuation (i.e. source transfer is not dependent on the position of the opposing source). The transfer switch is either closed on Source 1, closed on Source 2 or in a center off, neutral position (not closed on either source). Thus, provides safe transfer operation for large stored-energy loads by allowing the residual voltage to decay to a safe level before transfer.

    Advanced transfer switch mechanism – Patented Blow-On design allows for high survivability in extreme fault current conditions. Actuator designed for high strengthlocking capability, ensuring electrical contacts remain closed when needed to be closed.  Main contacts – Heavy-duty silver alloy contacts usedwith multi-leaf arc chutes are rated for motor loads or totalsystem load transfer.

    Ease of service and access – Built-in plug-and-playcontrol with minimized point-to-point connections and compatible terminal markings simplify servicing. Access space is ample. Door-mounted controls are field-programmable; no special tools are required.

    Complete power system provider – Cummins is a single source supplier and integrator of complete systems and
    services for ease of interconnection and reduced commissioning times.

    Warranty and service – Products are backed by a comprehensive warranty and a worldwide network of
    distributors with factory-trained service technician.

Specifikime teknike
  • Referencë unikeb-series-cbt-bypass-isolation-transfer-switch
  • Familja e produkteveSwitches
  • Grupi i produkteveAutomatic Transfer Switches
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2026-08-04
  • Numri i botimit1
Të ngjashme
  • Materiali kryesorÇelik
  • Projektuar nëShtetet e Bashkuara
  • Prodhuar nëShtetet e Bashkuara
Klasifikimi
  • Kategoria BIMobjectElektrike - Dhomë shpërndarse
  • IFC classificationShpërndarja elektrike
  • Uniclass 2015 CodePr_60_70_48_05
  • Uniclass 2015 PërshkrimAutomatic transfer switching equipment (TSE)
  • CSI MasterFormat 2014 Code26 36 00
  • CSI MasterFormat 2014 TitleTransfer Switches
  • OmniClass Number23-35 37 11
  • OmniClass TitleAutomatic Transfer Switches

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika
Common.Footer.ValueProp.Image.AltText

Aplikacion dizajnimi për Revit

Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

  • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
  • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
  • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit