QS Wire Landing Board

QS Wire Landing Board

The wire landing board is a wiring aid consisting of a printed circuit board with one set of five terminal blocks. Each terminal block can accept up to two 18 AWG (1.0 mm2) wires and is connected pin-to-pin, to simplify wiring. The wire landing board can be installed in a low-voltage enclosure or at the bottom of a feed-through panel.

Kontaktoni me Lutron Electronics

Specifikim
  • Amp Rating 0 amps to 1 amps
    Depth 0.5"
    Height 4.036"
    Voltage 24 V
    Width 1.45"
    Type QS System Landing Board
    Environment Indoor

Specifikime teknike
  • Referencë unikelutron-wire-landingboard
  • Familja e produkteveLighting Controls
  • Grupi i produkteveQuantum Total Light Management™
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2019-11-22
  • Numri i botimit1
  • Gjatësia (inçet)4
  • Gjerësia (inçet)1.45
  • Thellësisë (inçet)0.5
Të ngjashme
  • Materiali kryesorPlastik
  • Projektuar nëShtetet e Bashkuara
  • Prodhuar nëShtetet e Bashkuara
Klasifikimi
  • Kategoria BIMobjectElektrike - Pult komandimi
  • CSI MasterFormat 2014 Code26 27 16
  • CSI MasterFormat 2014 TitleElectrical Cabinets and Enclosures
  • OmniClass Number23-35 25 23
  • OmniClass TitleElectrical Control Panels

Rajoni i disponueshëm

North America
Shtetet e Bashkuara
Common.Footer.ValueProp.Image.AltText

Aplikacion dizajnimi për Revit

Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

  • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
  • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
  • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit