Infiltration module - EcoBloc Inspect 420+230 flex
Infiltration module - EcoBloc Inspect 420+230 flex
Infiltration module - EcoBloc Inspect 420+230 flex
Infiltration module - EcoBloc Inspect 420+230 flex
Infiltration module - EcoBloc Inspect 420+230 flex

    Infiltration module - EcoBloc Inspect 420+230 flex

    The third generation of GRAF infiltration and attenuation system

    • BBA Agrément Certificate Number 15/5200 for GRAF EcoBloc Inspect flex
    • DIBt, BBA , QB Assainissement
    • Universal use:For rainwater infiltration, retention or rainwater harvesting
    • Twice the volume per truck: To save space during transport, two EcoBloc Inspect flex modules are stacked one inside the other. This halves transport costs and CO2 emissions.
    • Easy to install: GRAF EcoBloc Inspect flex modules are easy to transport and install. The modular system structure requires few accessories.
    • Easy to inspect: The standard inspection channel allows the entire infiltration system to be effectively monitored. The ability of the EcoBloc Inspect system allow access by inspection cameras that are commonly found on the market. This has been confirmed, by several independent testing authorities.
    • Can be cleanded by high pressure jetting: GRAF EcoBloc Inspect system can be easily
      cleaned by high pressure jetting.
    • Highly flexible: Each EcoBloc Inspect flex module has a volume of 205 l, a area of 800
      x 800 mm and a height of 320 mm. The system size and loadbearing can be adjusted individually to suit requirements of traffic and of non-traffic area.
    • Lorry-bearing: The GRAF EcoBloc Inspect has a heavy-duty lorry-bearing capacity of 60 tons with a 800 mm earth covering.
    • Installation depth of up to 5 metres: Even under very heavy loads, GRAF EcoBloc Inspect system can be installed at a depth of up to 5 metres. This means that up to 14 layers are possible.
    • Connection up to DN 200: Large infiltration volumes require large pipe cross-sections. This isn‘t a problem for GRAF EcoBloc Inspect: it has DN 110, 160 and 200 connections on all sides. DN 100 connections are positioned eccentrically
      at the side for complete deaeration.
    • Designed for decades of use: A durable product design ensures sustainability.
      Built to offer double safety, the GRAF EcoBloc Inspect is designed for a service
      life of over 50 years.
    • High infiltration rate: The GRAF EcoBloc Inspect system is designed to have high rate of infiltration and barrierfree inspection.
    Specifikim
    • EcoBloc Inspect flex

      The EcoBloc Inspect flex can be used for detention, retention and infiltration of rainwater or surface water
      and must always be fitted and installed on the EcoBloc Inspect baseplates. The EcoBloc Inspect
      elements should be connected together using Eco connectors. Multiple layers can be laid by using
      multiple EcoBloc Inspect flex elements without any other accessories. Maximum number of layers 14
      (vehicle load) or 13 (HGV60/HS-25 load). Inspection and cleaning by self-propelling camera cart or
      probes with connection of DN 200 (8” pipe) Inspection entries. Open interior structure ensures good
      visibility and ease of movement as well as multidimensional through flow. Long-term load-bearing
      capacity up to HGV60 load (HS-25) verified.

      Technical data:
      Dimensions (LxWxH): 800 x 800 x 320 mm (31.44” x 31.44” x 12.6”)
      Weight: approx. 8 kg (17.6 lbs)
      Material: Polypropylene PP (100 % recyclable)
      Colour: Grey
      Volume: 205 litres / 195 litres (54 US gal. net) / (51.5 US gal. net)
      Reservoir coefficient: 95 %
      Connections: 4 x DN 200/160/110 + 4 x DN 110 (4 x 8”/6”/4” + 4 x 4”)

      Note: The EcoBloc Inspect should be laid on a geotextile or membrane which in turn is laid on a blinding which
      has been smoothed flat. Installation of the system should be carried out following the manufacturer's
      instructions.
      Product: EcoBloc Inspect flex

      Accessory
      EcoBloc Inspect baseplate

      Baseplate for laying EcoBloc Inspect flex 205 infiltration elements. Baseplates should be laid to give
      sufficient coverage by positioning with Eco connectors – see separate item. Long-term load-bearing
      capacity up to HGV60 (HS-25) load verified.
      Technical data:
      Dimensions (L x W x H): 800 x 800 x 40 mm (31.44” x 31.44” x 1.57”)
      Weight: 4 kg (8.8 lbs.)
      Material: Polypropylene PP (100 % recyclable)
      Colour: Grey
      Volume: 25 litres (6.6 US-gal.)

      Note: Each EcoBloc Inspect baseplate should be laid on a geotextile or membrane – see GRAF Tex geotextile
      – which in turn is laid on an excavation which has been smoothed flat – again see excavation instructions.
      Installation of the system should be carried out following the manufacturer's instructions and strictly
      adhered to.
      Product: GRAF EcoBloc Inspect baseplate

      EcoBloc Inspect end plate - Eco end plate set

      EcoBloc Inspect end plates are fitted at the end of every row of GRAF EcoBloc Inspect flex 205. They
      include connection surfaces of different pipe sizes.

      Technical data:
      Set consists of two end plates
      Dimensions (LxWxH): 742 x 660 x 54 mm (29.2” x 25.98” x 2.1”)
      Material: Polypropylene PP (100 % recyclable)
      Colour: Grey
      One Eco end plate is needed for each EcoBloc Inspect flex 205 face plate (at end of row only).
      Connections: 2 x DN 200/160/110 (2 x 8”/6”/4”) per plate
      Product: GRAF EcoBloc Inspect end plate - Eco end plate set

      Eco connectors
      Eco Connectors are used to secure individual EcoBloc units together to form the larger EcoBloc
      assembly. One connector is required for each contact side of the EcoBloc.
      Technical data:
      Dimensions (LxWxH): 68 x 26 x 38 mm (2.67” x 1.02” x 1.5”)
      Material: Polypropylene PP
      Product: GRAF Eco connectors

      GRAF-Tex geotextile
      Graf-Tex geotextile (8 ounce, non-woven geo-textile fabric), 100 % polypropylene filter membrane,
      mechanically needle-punched to form continuous filament. Rot-proof material between soil and infiltration
      system prevents infiltration layers from silting up. The Graf-Tex geotextile ensures long lifetime,
      consistent infiltration and high permeability.
      Technical data:
      Opening width: 100 µm
      Water permeability coefficient kv (s = 20 kPa): 1.0 x 10-3 m/s
      Tensile strength (lengthwise / crosswise): 15 kN/m / 15 kN/m
      Punch push-through force (x-s): 2.0 kN
      Weight: 200 g/m²
      Robustness class: 3
      Roll material: Roll width 5 m (196.9”)
      Product: GRAF-Tex geotextile

    Specifikime teknike
    • Referencë unikeEcoBloc-Inspect
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2026-03-19
    • Numri i botimit1
    • Gjerësia (mm)800
    • Thellësia (mm)800
    Të ngjashme
    • Materiali kryesorPolypropylene
    • Projektuar nëGjermani
    • Prodhuar nëGjermani
    Klasifikimi
    • Kategoria BIMobjectInxhinieri & Infrastrukturë - Ujë

    Rajoni i disponueshëm

    Europe Asia North America Africa South America Oceania
    Andorrë
    Afganistan
    Anguilë
    Afrika e Jugut
    Argjentinë
    Australi
    Austri
    Arabia Saudite
    Antigua dhe Barbuda
    Algjeri
    Bolivi
    Fixhi
    Belgjikë
    Armeni
    Arubë
    Angolë
    Brazil
    Guam
    Bjellorusi
    Azerbaixhan
    Bahamas
    Benin
    Ekuador
    Ishujt Cook
    Bosnjë dhe Hercegovinë
    Bahrejn
    Barbados
    Botsvanë
    Guajanë
    Ishujt Marshall
    Bulgari
    Bangladesh
    Belizë
    Burkina-Faso
    Guiana franceze
    Ishujt Minor Periferik të Shteteve të Bashkuara
    Danimarkë
    Brunei
    Bermude
    Burundi
    Ishujt Falkland (Islas Malvinas)
    Ishujt Pitcairn
    Estoni
    Butan
    Dominikë
    Çad
    Kili
    Ishujt Solomon
    Finlandë
    Emiratet e Bashkuara Arabe
    Granadë
    Côte d’Ivoire
    Kolumbi
    Ishujt Veriore të Marianës
    Francë
    Filipinet
    Grenlandë
    Egjipt
    Paraguaj
    Ishulli Norfolk
    Gërnzi
    Gjeorgji
    Guadelupë
    Eritre
    Peru
    Kaledonia e Re
    Gjermani
    Hong-Kong
    Guatemalë
    Esvatini
    Surinami
    Kiribati
    Gjibraltar
    Indi
    Haiti
    Etiopi
    Uruguai
    Nauru
    Greqi
    Indonezi
    Honduras
    Gabon
    Venezuelë
    Niue
    Holandë
    Irak
    Ishujt e Virgjër Britanikë
    Gambia
    Palau
    Hungari
    Iran
    Ishujt e Virgjër të SHBA
    Gana
    Papua Guinea e Re
    Irlandë
    Ishujt Cocos (Keeling)
    Ishujt Kajman
    Guine
    Polinezia franceze
    Ishujt Alandë
    Izrael
    Kanadë
    Guine-Bisau
    Samoa
    Ishujt Faroe
    Japoni
    Karaibe Holandë
    Guinea Ekuatoriale
    Samoa amerikane
    Ishulli i Njeriut
    Jemen
    Kolektiviteti i Shën Martinit
    Kamerun
    Shtetet Federale të Mikronezisë
    Islandë
    Jordani
    Kosta Rika
    Kenia
    Timor-Leste
    Itali
    Kamboxhi
    Kubë
    Kepi i Gjelbër
    Tokelau
    Kroacia
    Katar
    Kuraçao
    Komora
    Tonga
    Letoni
    Kazahstan
    Martinikë
    Lesoto
    Tuvalu
    Lihtenshtajn
    Kinë
    Meksikë
    Liberi
    Vanuatu
    Lituani
    Kirgistan
    Montserat
    Libi
    Wallis dhe Futuna
    Luksemburg
    Korea e jugut
    Nikaragua
    Madagaskar
    Zelanda e Re
    Mali i Zi
    Korea e Veriut
    Panama
    Majotë
    Maltë
    Krishtlindje Island
    Porto Riko
    Malavi
    Maqedonia e Veriut
    Kuveit
    Republika Domenikane
    Mali
    Mbretëria e Bashkuar
    Laos
    Salvador
    Marok
    Moldovë
    Liban
    Sen-Bartelemi
    Mauritius
    Monako
    Makao
    Shën Kitts dhe Nevis
    Mavritani
    Norvegji
    Malazi
    Shën Lucia
    Mozambik
    Poloni
    Maldive
    Shën Pierre dhe Miquelon
    Namibi
    Portugali
    Mianmar (Burmë)
    Shën Vincent dhe Grenadinet
    Niger
    Qipro
    Mongoli
    Shtetet e Bashkuara
    Nigeri
    Qyteti i Vatikanit
    Neoal
    Sint-Marten
    Republika Demokratike e Kongos
    Republika Çeke
    Oman
    Trinidad dhe Tobago
    Republika e Afrikës Qendrore
    Rumani
    Pakistan
    Turks dhe Caicos Islands
    Republika e Kongos
    Rusi
    Palestinë
    Xhamaika
    Reunion
    San-Marino
    Singapor
    Ruandë
    Serbi
    Siria
    Sahara Perëndimore
    Shqipëri
    Sri-Lankë
    São Tomé dhe Príncipe
    Sllovaki
    Tajlandë
    Sejshelle
    Sllovenia
    Tajvan
    Senegal
    Spanjë
    Taxhikistan
    Shën Helena
    Suedi
    Territori Britanik i Oqeanit Indian
    Sierra-Leone
    Svalbard dhe Jan Mayen
    Turkmenistan
    Somali
    Ukrainë
    Turqi
    Sudan
    Xhersej
    Uzbekistan
    Sudanin Jugor
    Zvicër
    Vietnam
    Tanzani
    Togo
    Tunizi
    Ugandë
    Xhibuti
    Zambi
    Zimbabve