Industrial Control Damper - Thermally Broken Frame - Broken Airfoil Parallel Blade - TICD-51BF
Pottorff

Industrial Control Damper - Thermally Broken Frame - Broken Airfoil Parallel Blade - TICD-51BF

Thermally Broken Frame Control Damper
Broken Airfoil Blade

The TICD-51BF control damper employs thermally insulated and broken aluminum airfoil blades and a thermally broken rugged channel frame to eliminate the transfer of heat or cold penetration and reduce condensation. The TICD51BF damper provides extreme low leakage as well as exceptional air control in medium to high pressure and velocity applications. Both models comply with the IECC (International Energy Conservation Code) with a leakage rating of 3 cfm/ft2 @ 1 in. wg. (0.015 m3/s/m2 @ 0.25 kPa) or less.

Specifikim
  • Standard Construction

    Frame: 4" x 1" x 0.081" (102 x 25 x 2) top/bottom and
    4" x 1-1/8" x 0.081" (102 x 29 x 2) jambs, extruded aluminum channel.

    Blades: 6" (152) heavy gauge, dual wall thermally insulated and broken extruded aluminum - airfoil. Parallel.

    Axles: 1/2" (13) diameter plated steel hex.

    Linkage: Concealed in frame.

    Bearings: Synthetic.

    Seals: Silicone - blade edge and jambs. Mechanically fastened.

    Control Shaft: 1/2" x 6" (13 x 152) round drive axle with outboard shaft support bracket and bearing supplied for field installation. Factory installed 3/4" (19) diameter jackshaft on all multiple section dampers more than 2 sections wide.

    Minimum Size: 6" x 6.5" (152 x 165)

    Maximum Size:
    Single Section: 60" x 72" (1524 x 1829)
    Multiple Section: Unlimited


    Ratings

    Temperature: -70oF to 212oF (-57oC to 100oC)

    Leakage Class: 1A and 1 (see table on product sheet)

Specifikime teknike
  • Referencë unikeIndustrial-Control-Damper-Thermally-Broken-Frame-Broken-Airfoil-Parallel-Blade-TICD-51BF
  • Familja e produkteveHVAC
  • Grupi i produkteveAir Control Dampers
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2024-07-16
  • Numri i botimit1
Klasifikimi
  • Kategoria BIMobjectNgrohes, ventilimit dhe ajrit të kondicionuar - Gyp
  • Uniclass 2015 CodePr_65_65_24
  • Uniclass 2015 PërshkrimDuct dampers
  • CSI MasterFormat 2014 Code23 33 13.13
  • CSI MasterFormat 2014 TitleVolume-Control Dampers
  • OmniClass Number23-33 29 37
  • OmniClass TitleVolume Control Dampers

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika
Common.Footer.ValueProp.Image.AltText

Aplikacion dizajnimi për Revit

Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

  • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
  • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
  • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit