EcoSystem® Ballast, Type G and Type J Case, 10% Dimming, Non-Volatile Memory

Features
• Continuous, flicker-free dimming from 100% to 10%
• Integral sensor connection provides power for and
responds to one occupancy sensor, one photo
sensor, and one personal control input (infrared
receiver or wallstation)
• Communicates status and sensor inputs over the
EcoSystem digital link
• Programmed rapid start design ensures full rated
lamp life while dimming and cycling
• Lamps turn on to any dimmed level without flashing to
full brightness
• Low harmonic distortion throughout the entire
dimming range
• Frequency of operation ensures that ballast does not
interfere with infrared devices
• End-of-lamp-life protection circuitry ensures safe
operation throughout entire lamp life
• Ultra-quiet operation
• Non-volatile memory restores all ballast settings after
power failure
• Ballasts maintain consistent light output for linear lamp
lengths (e.g., 4 ft [1.5 m], 3 ft [1 m], 2 ft [0.5 m] have
same relative output)
• Protected from miswires of any input power to control
lead, or from lamp leads to each other and/or ground
• 100% performance tested at factory
• Custom ballast factors available. Design tool
and specifications can be found at
www.lutron.com/ballasttool
• BAA-compliant (Buy American Act) model numbers
available. Add a "U" prefix to the model number