Publiko produktet
Flo-Clean Strainer - SS60

Flo-Clean Strainer - SS60

Series 2260 Flo-Clean Strainers are used to filter the fluid passing through the pilot circuit, and provide protection to pilot circuit speed controls and pilots. It is installed in the inlet body port of the Main Valve, exposing the strainer element to main line flow. The currents and flow across the screen create a self-scouring effect, cleaning the filter element.

Özellikler
  • Features

    • Provides protection to pilot circuit speed controls and pilots
    • Flow across the screen creates a self-scouring effect that cleans the filter element
    • Filters fluids passing through the pilot circuit
    • Installed in the inlet body port of the Main Valve, where the strainer element is exposed to main line flow
Teknik özellikler
  • Benzersiz ref.SS60
  • Ürün ailesiPlumbing & Flow Control Solutions
  • Ürün grubuAutomatic Control Valves
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2019-11-18
  • Baskı numarası1
İlgili
  • Ana malzemePaslanmaz Çelik
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiSıhhi tesisat - Valfler
  • IFC sınıflandırmasıValf
  • UNSPSC adıValves
  • UNSPSC kodu401416
  • Uniclass 2015 koduPr_65_54_40_13
  • Uniclass 2015 açıklamasıCheck valves
  • CSI MasterFormat 2014 kodu40 05 65.23
  • CSI MasterFormat 2014 başlığıSwing Check Valves
  • OmniClass numarası23-27 31 19
  • OmniClass başlığıCheck Valves
  • CSI UniFormat II koduD20
  • CSI UniFormat II başlığıPLUMBING

Bölge bulunurluk durumu

Kuzey Amerika
Birleşik Devletler
Kanada
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin