Publiko produktet
ARDEX ADHESIVE 4X4 - Adhesive in thin layer for ceramic coverings
ARDEX

ARDEX ADHESIVE 4X4 - Adhesive in thin layer for ceramic coverings

Powder with gray or white cement, fillers, synthetic resins and selected additives. Mixing with water results in a mild mortar that hardens by hydration and drying. It is waterproof and resistant to the elements in a few days. It adheres perfectly to the usual supports in construction, such as concrete, cement masters, anhydrite masters, plasters, plaster, masonry and similar supports, creating a firm adhesion between the different construction materials
Özellikler
  • Mixing ratio: Approx. 8 l of water: 25 kg of powder (equivalent to 1 vol of water: 2 1/2 vol of powder) Density: 1.3 kg / l Density of the fresh mortar: 1.5 kg / l Performance: On smooth supports: Approx. 1.14 kg / m2 / mm Workability (20 ° C): Approx. 5 hours. Setting time (20 ° C): (open time) Approx. 30 minutes (measured with fresh mortar). Adjustment time (20ºC): Approx. 15-20 minutes.
Teknik özellikler
  • Benzersiz ref.ardex-adhesive-4x4
  • Ürün ailesiTile & Stone Installation System
  • Ürün grubuTile Adhesive
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2019-11-07
  • Baskı numarası1
İlgili
  • Ana malzemePolymer-modified cementitious
  • Tasarım yeriİspanya
  • Üretim yeriİspanya
Sınıflandırma
  • BIMobject kategorisiZemin Kaplama - Tiles
  • IFC sınıflandırmasıFloor
  • UNSPSC adıFlooring
  • UNSPSC kodu301617
  • Uniclass 2015 koduEF_30_20
  • Uniclass 2015 açıklamasıFloors
  • CSI MasterFormat 2014 kodu09 60 00
  • CSI MasterFormat 2014 başlığıFlooring
  • OmniClass numarası23-13 23 15
  • OmniClass başlığıAdhesives
  • CSI UniFormat II koduC3020
  • CSI UniFormat II başlığıFloor Finishes

Bölge bulunurluk durumu

Avrupa
İspanya
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin