Publiko produktet
BETAFENCE Securifor 358 Double Skin + Angle Iron Post
Betafence

BETAFENCE Securifor 358 Double Skin + Angle Iron Post

Manufactured in South Africa

Securifor® 358 Double Skin
Flat Panel
A double-layered flat panel fence when maximum security is required.

FEATURES & BENEFITS
Unrivaled security
Securifor® Doubleskin is the ultimate high-security panel. It consists of two mesh panels welded together, one rotated through 90°. Small apertures of only 12.7x12.7mm and 4mm thick wires (4.40mm when coated) deliver superior protection against attacks.


Breakthrough resistant

In-house tests delayed attempts to break through the panel by up to 12 minutes. This longer delay time is critical in maximum security environments where it is essential to intercept and stop breach attempts.

Vandal resistant

A cover plate secures the panel’s edges protecting against attempts to pry panels loose from the post.

Electric Fence Compliance

Panel widths meet the maximum distance requirement for electrical fence installation compliance.

Full system 10-year guarantee
(standard terms & conditions apply) Superior coatings underpin our 10-year anti-corrosion guarantee when Betafence’s full system (panels, posts, and stainless steel fixators) is used.


Özellikler
  • Panels

    Wire diameter: 4mm (4.40mm coated)
    Apertures: 12.7mm x 12.7mm
    Technical Data Sheet available on request.

    Posts & Fixing Mechanisms

    Angle Iron Posts:
    3.2m posts: 100mm x 75mm x 8mm
    3.8m post: 100mm x 75mm x 8mm
    Cover plate: 70mm x 6mm
    Made from a rolled sheet, then hot-dip
    galvanized and PES coated RAL 6005 Green
    or RAL 7021 Anthracite.

    To protect against tampering, the panel’s edges are covered by a cover plate secured with M8 stainless steel tamper-proof security bolts and shear-off nuts, firmly bolted through the post. This combination of Betafence panels, posts and superior fixing mechanisms
    delivers a complete fencing system that ensures the installation’s integrity and protection levels. The top and bottom rail adds rigidity to the fence line and further discourages climb over attempts.

Teknik özellikler
  • Benzersiz ref.betafence-betaview-securifor-358-double-skin-Angle-Iron-Post
  • Ürün ailesiMetal Fence Panel
  • Ürün grubuSA Securifor
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2022-10-28
  • Baskı numarası1
Bağlantılar
İlgili
  • Ana malzemeÇelik
Sınıflandırma
  • BIMobject kategorisiPeyzaj - Çit Duvarı

Bölge bulunurluk durumu

Afrika
Angola
Benin
Botswana
Burkina Faso
Burundi
Çad
Cape Verde
Cibuti
Comoros
Demokratik Kongo Cumhuriyeti
Ekvator Ginesi
Eritre
Esvatini̇
Etiyopya
Fildişi Sahili
Gabon
Gambiya
Gana
Gine
Guinea-Bissau
Güney Afrika
Güney Sudan
Kamerun
Kenya
Kongo
Lesotho
Liberya
Madagaskar
Malavi
Mali
Mauritius
Mayotte
Moritanya
Mozambik
Namibya
Nijer
Nijerya
Orta Afrika Cumhuriyeti
Reunion
Ruanda
Saint Helena
São Tomé ve Príncipe
Senegal
Seychelles
Sierra Leone
Somali
Sudan
Tanzanya
Togo
Uganda
Zambiya
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin