Publiko produktet
BETAFENCE Securifor 358 Dublo + Angle Iron Post
Betafence

BETAFENCE Securifor 358 Dublo + Angle Iron Post

Manufactured in South Africa

Securifor® 358 Dublo
Flat Panel
A flat panel reinforced with double vertical wires for increased intrusion resistance and security.

FEATURES & BENEFITS
Proven resistance against cutting attempts

An additional vertical wire welded onto the back of the panel increases its resistance to cutting attempts by 30%. This longer delay time is critical in high-security environments where it is essential to intercept and stop breach attempts.

Visibility

Despite the small mesh apertures, the fence appears almost invisible from a distance, even at anangle. It is ideal for use with surveillance systems.

Electric Fence Compliance

Panel widths meet the maximum distance requirement for electrical fence installation compliance.

Full system 10-year guarantee
(standard terms & conditions apply)
Superior coatings underpin our 10-year anti-corrosion guarantee when Betafence’s full system
(panels, posts, and stainless steel fixators) is used.


Özellikler
  • Panels

    Wire Diameter: 4mm (4.40mm coated)
    Apertures: 76.2mm x 12,7mm

    Posts & Fixing Mechanisms

    Angle Iron Posts:
    3.2m posts: 70mm x 70mm x 6mm
    3.8m post: 100mm x 75mm x 6mm
    Cover plate: 70mm x 6mm

    Made from a rolled sheet, then galvanized and PES coated RAL 6005 Green or RAL 7021 Anthracite. 

    To protect against tampering, the panel’s edges are covered by a cover plate secured with M8 stainless steel tamper-proof security bolts and shear-off nuts, firmly bolted through the post. This combination of Betafence panels, posts and superior fixing mechanisms delivers a complete fencing system that ensures the installation’s integrity and protection levels. The top and bottom rail adds rigidity to the fence line and further discourages climb over attempts.

Teknik özellikler
  • Benzersiz ref.betafence-betaview-securifor-358-Dublo-Angle-Iron-Post
  • Ürün ailesiMetal Fence Panel
  • Ürün grubuSA Securifor
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2022-10-28
  • Baskı numarası1
Bağlantılar
İlgili
  • Ana malzemeÇelik
Sınıflandırma
  • BIMobject kategorisiPeyzaj - Çit Duvarı

Bölge bulunurluk durumu

Afrika
Angola
Benin
Botswana
Burkina Faso
Burundi
Çad
Cape Verde
Cibuti
Comoros
Demokratik Kongo Cumhuriyeti
Ekvator Ginesi
Eritre
Esvatini̇
Etiyopya
Fildişi Sahili
Gabon
Gambiya
Gana
Gine
Guinea-Bissau
Güney Afrika
Güney Sudan
Kamerun
Kenya
Kongo
Lesotho
Liberya
Madagaskar
Malavi
Mali
Mauritius
Mayotte
Moritanya
Mozambik
Namibya
Nijer
Nijerya
Orta Afrika Cumhuriyeti
Reunion
Ruanda
Saint Helena
São Tomé ve Príncipe
Senegal
Seychelles
Sierra Leone
Somali
Sudan
Tanzanya
Togo
Uganda
Zambiya
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin