High Pressure Laminate Restroom Partitions

DESCRIPTION
High pressure laminate (HPL) toilet partition components are produced by gluing sheets of HPL to particle board core.
These sheets are machined, finished and cut to size. HPL components perform well in commercial restrooms and are
available in a extensive range of patterns, solids, and wood grains.

CONSIDERATIONS

• HPL is not suitable for use in wet or steam locations.
• HPL is not suitable in extreme abuse locations.
• Excessive fluids should be avoided during cleaning.
• Horizontal grain applications require consultation.
• Directional patterns have a maximum single, non-splice component
• width of 60 inch. Non-directional patterns cannot exceed 60 inch in

CONSTRUCTION

• HPL: horizontal, post form grade laminate .038 thick.
• Core: 45lb engineered wood board.
• Sheet adhesive: poly-vinyl acetate
• Edge: coordinated PVC banding is attached using PUR adhesive.

DIMENSIONS

• Headrail braced pilaster heights is 82 inch with 58 and 72 inch doors and 94.5 inch tall with 84 inch doors.
• Floor to ceiling pilaster heights are 1 inch less than floor to ceiling height to allow for hardware.
• Panel height will match selected door height. Panels are available from 3 to 60 inches wide.

Available Door Width
24 inch | 610 mm
34  inch | 864 mm 
36 inch | 914 mm

Available Panel and Door Height
58 inch | 1473 mm
72 inch | 1829 mm 
84 inch | 2134 mm

Standard Wood Veneer Pilaster Widths
mm: 76, 102, 127, 152, 178, 203, 229, 254, 305, 356, 406, 457, 508, 559, 610, 762
inch: 3, 4, 5, 6, 7, 8, 9, 1,0 ,12, ,14 ,16 , 18, 20, 22, 24, 30.