Phase Adaptive DIN Power Module

The DIN Power Module (DPM) family is a group of
modular products for the control of lighting loads and
motor loads.
This document describes the following product:
LQSE-4A5-120-D: 4-Zone DIN Power Module
for phase control dimming of lighting loads

Spojte se se značkou Lutron Electronics

Specifikace

Phase Adaptive Power Modules can be used in a
HomeWorks system using a QSX processor.
• Includes QS link for seamless integration of lights and
controls.
• An auto-detect mode is available to detect and
configure leading-edge or trailing-edge dimming for
incandescent / halogen, electronic / magnetic lowvoltage
and neon / cold cathode light sources.
• Controls dimmable LED loads. Refer to
www.lutron.com/ledtool for compatibility with
dimmable LED light sources.
• SSL7 compliant for compatibility with solid state
lighting.
• RTISS Equipped technology compensates for
incoming line-voltage variations (up to ± 2% change
in frequency /second) such as changes in Root Mean
Square (RMS) voltage, frequency shifts, harmonics
and line noise.
• RTISS-TE operates on the trailing-edge of the AC
sine wave. This allows for true instantaneous voltage
compensation.
• RTISS-ICM technology is able to withstand highinrush
LEDs, bulb blowouts, and direct shorts
• Provides air gap off (when all zones are off).
• Integral protection for common temporary over-current
and over-voltage conditions.
LEDs on the module provide diagnostic information.
• Buttons on the module provide override control.
• Manual Override contact closure input (CCI).
• Power failure memory automatically returns the
outputs to the levels they were set to prior to a power
outage.