1.3.2 PARTITION WALLS BETWEEN HOUSES - Twin cavity partition with drywall assembly1.3.2 PARTITION WALLS BETWEEN HOUSES - Twin cavity partition with drywall assembly1.3.2 PARTITION WALLS BETWEEN HOUSES - Twin cavity partition with drywall assembly
Vorherige Bilder anzeigen
Nächste Bilder anzeigen
Pladur

1.3.2 PARTITION WALLS BETWEEN HOUSES - Twin cavity partition with drywall assembly

Mixed partition made up of two independent Pladur® linings, both braced on each side by a Pladur® partition wall. Each partition is made up of a structure of galvanised sheet steel profiles, built on studs (vertical elements) and channels (horizontal elements), on whose interior side, depending on the free-standing height, the studs will need be braced with brackets attached to the core of the studs and the Pladur®, partition, leaving a space between the structure and the partition base of a minimum of 10 mm. On the exterior of each lining structure, one or two Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on floors and ceilings, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the project). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
Spezifikation
  • Separation walls between distinct use areas (between inhabitable premises, protected or not) and between these areas and other common areas of buildings.
Technische spezifikation
  • Referenznummerpladur_1_tqs_1_32
  • Produktfamilie1. Tabiques de separación PLADUR®
  • Produktgruppe1.3. Mixtos
  • TypeObjekt (Einzelobjekt)
  • Veröffentlichungsdatum2017-06-22
  • Editionsnummer1
Verwandt
  • HauptmaterialGips
  • Sekundär MaterialTrockenbauplatte
  • Entwickelt inSpanien
  • Hergestellt inSpanien
Klassifikation
  • BIMobject KategorieWände - Innen- und Trennwände
  • IFCClassificationWand
  • UNSPSCNameGypsum board
  • UNSPSCCode30161509
  • Uniclass1_4CodeJK30
  • Classifications.Uniclass1_4BeschreibungPanel partitions
  • Classifications.Uniclass2_0CodeSS-25-12-65
  • Classifications.Uniclass2_0BeschreibungPanel Partition Systems
  • Classifications.Uniclass2015CodeSs_25_10_30_35
  • Classifications.Uniclass2015BeschreibungGypsum board partition systems
  • NBSReferenceCode25-10-30-35
  • NBSReferenceBeschreibungGypsum Board Partition Systems
  • Klassifizierung09 21 16.33
  • Format2014TitelGypsum Board Area Separation Wall Assemblies
  • OmniClassNummer23-15 11 11 11
  • CSIUniFormatIICodeC1010
  • CSIUniFormatIITitlePartitions

Verfügbarkeit in den Regionen

Europe
Spanien
Portugal