Publish your products
VLA-C2100 Two-Way Full Range Loudspeaker with  2 x 10" Differential Drive® LF

VLA-C2100 Two-Way Full Range Loudspeaker with 2 x 10" Differential Drive® LF

Two-Way Full Range Loudspeaker with 2 x 10" Differential Drive® LF
The VLA-C2100 uses JBL proven technology components. The high frequency section is horn-loaded for maximum sensitivity and optimum pattern control and features three D2415 drivers featuring 1.5” diameter annular diaphragms, 1.5” voice coils, and neodymium motors.

The low-frequency section utilizes dual 2261 10” Differential Drive® 3” voice coil drivers.

Enclosures feature multi-layer reinforced fiberglass and steel end-panels. Grilles are zinc plated, powder coated 14-gauge perforated steel with an acoustically transparent black grill cloth backing, a hydrophobic mesh underlayer, and a waterproof rail system. 

The rigging system is inherent to the design of the system. Inter-box angles are selected when the array is assembled. Other accessories include a rigging frame, pull-back bar, and a cardioid kit for the sub.


  • Compact line array module optimized for permanent install applications
  • Advanced technology component transducers for low weight and high output
  • Outdoor IP55 rated enclosure for protection from dust and water
  • Comprehensive rigging points for creating a line array configuration
  • Fiberglass box construction and weatherized components
  • Can be bi-amplified for maximum SPL, or fed passively for reduced amplification costs
  • 100° horizontal coverage pattern

Keywords: Harman

    Frequency Range (-10 dB) 86 Hz - 18 kHz
    Frequency Response (±3 dB) 109 Hz – 15.3 kHz
    System Power Rating  
    Full Range 800 W Continuous Pink Noise (3200 W peak), 2 hrs 
    400 W Continuous Pink Noise (1600W peak), 100 hrs
    Bi-amp LF 800 W Continuous Pink Noise (3200 W peak), 2 hrs 
    400 W Continuous Pink Noise (1600W peak), 100 hrs
    Bi-amp HF 150 W Continuous Pink Noise (600 W peak), 2 hrs 
    50 W Continuous Pink Noise (200 W peak), 100 hrs
    Maximum Input Voltage  
    Full-Range 80 V Rms (2 hrs), 160 V peak
    Bi-Amp LF 80 V Rms (2 hrs), 160 V peak
    Bi-Amp HF 50 V Rms (2 hrs), 135 V peak
    Maximum SPL (1m) 131 dB Cont. Ave (2 hrs), 137 dB Peak
    Full-Range 102 dB (85 Hz – 19 kHz)
    Bi-Amp LF 100 dB (85 Hz – 950 Hz
    Bi-Amp HF 107 dB (950 Hz – 19.2 kHz)
    Coverage Pattern (-6 dB) Horizontal: 100° (+5°/-15°, 1.5 kHz to 15 kHz) 
    Vertical: Varies with array size and configuration
    Full-Range 8Ω, 6.7Ω min @ 200 Hz
    Bi-Amp LF 8Ω, 6.9 Ω min @ 230 Hz
    Bi-Amp HF 16 Ω, 15.9 Ω min @ 1.1 kHz
    Amplifiers Crown DCi Family with DSP on-board
    Crown DCi 2 | 1250N 
    Crown DCi 4 | 1250N/ND/DA 
    Crown DCi 2 | 2400N 
    Crown DCi 4 | 2400N
    Low Frequency Driver 2 x 2261FF, 254 mm (10 in) diameter, each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
    High Frequency Driver 3 x 2415K, D2 Dual Diaphragm Dual Voice Coil Compression Drivers, each with two 38 mm (1.5 in) dia. Voice Coils; 21 mm (0.8 in) exit
    Enclosure Material Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing.
    Grille Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen.
    Inter-Enclosure Angles VLA-C2100 to VLA-C2100: 2.4°, 3.8°, 6.0°, 9.5°, 15° using VLA-C2100 Bracket Plate (included with VLA-C2100)

    VLA-C2100 to VLA-C265 (either model on top/bottom): 1.9°, 3.0° using VLA-C2100 Bracket Plate (included with VLA-C2100) and 4.7°, 7.5°, 11.9° using VLA-C265 Bracket Plate (included with VLA-C265)

    VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S)
    Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water)
    Terminals CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers
    Colors -GR: Gray (similar to Pantone 428C), -BK: Black
    Dimensions (H x W x D) 381 x 848 x 460 mm (15.0 x 33.4 x 18.1 in)
    Net Weight (ea) 37.7 kg (83 lbs)
    Shipping Weight (ea) 44.0 kg (97 lbs)
    Included Accessories 2 x VLA-C2100 Bracket Plates 
    8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hexdrive) for attaching Bracket Plates 
    2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 
    4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts
    Optional Accessories VLA-C-SB Suspension Bar Kit for the array, includes 2 identical Suspension Bars (for top/bottom), 4 pcs ¾-inch Class 2 Screw Pin Shackles (must use 2 Shackles for each Suspension Bar, located at end channels, not in the center).

Technical specification
  • Unique ref.VLA-C2100-Two-Way-Full-Range-Loudspeaker
  • Product familyInstalled Sound
  • Product groupLine Array Speakers
  • TypeObject (single object)
  • Date of publishing2019-06-22
  • Edition number1
  • Designed inUnited States
  • Manufactured inUnited States
  • BIMobject CategoryElectronics - Audio Electronics
  • IFC classificationObject
  • ETIM CodeEC000682
  • ETIM NameLoudspeaker set
  • UNSPSC nameAudio and visual presentation and composing equipment
  • UNSPSC code4511
  • Uniclass 2015 CodePr_70_75_36_50
  • Uniclass 2015 DescriptionLoudspeakers
  • CSI MasterFormat 2014 Code11 52 00
  • CSI MasterFormat 2014 TitleAudio-Visual Equipment
  • OmniClass Number23-37 15 29 11 13
  • OmniClass TitleLoudspeakers

Region availability

North America
Antigua and Barbuda
British Virgin Islands
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Dominican Republic
El Salvador
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States