Publique sus productos
EL 301 Automatic Sliding Door Operator
EL 301 Automatic Sliding Door Operator
    dormakaba

    EL 301 Automatic Sliding Door Operator

    4.2 de 5 estrellas4.2(6 reseñas)
    Traducido por Google,

    El dormakaba EL 301 combina una plataforma mecánica probada con tecnología de última generación.

    El EL 301 es un dispositivo robusto que brinda un control infinito, una función más suave y líneas más elegantes, lo que brinda posibilidades de diseño que solo están limitadas por la imaginación. El operador automático EL 301 cumple totalmente con la NCC (BCA) y se prueba según la norma australiana AS5007, prueba de resistencia de 1 millón de ciclos, cláusula 4.4.1.1. y prueba de falla de energía principal, cláusula 4.4.2 por una instalación acreditada por NATA.

    • Peso total de la puerta hasta 300 kg
    • Hecho en Australia
    • 1 millón de ciclos AS5007 - prueba de resistencia
    • Sistema UPS completamente integrado
    • Tecnología de bloqueo inteligente
    Especificaciones
    • The DORMA EL 301 is the benchmark for Australian automatic door operators, combining a proven mechanical platform and next generation technology the EL 301 is a robust performer that delivers infinite control, smoother function and sleeker lines, providing design possibilities that are limited only by the imagination. The DORMA EL 301 automatic door operator is engineered to control and operate bi-parting and single slide framed and frameless glass sliding doors and is a proven performer in airports, shopping centres, supermarkets, hotels, hospitals, financial institutions, sports stadiums and many other commercial sites. The Automatic Door Operator The Automatic single slide/bi-parting door operator is to be a 240-volt fully electric DORMA EL 301 SERIES. Fully housed in extruded aluminium (height 265mm x width 152mm). The equipment will incorporate the following: A 3 phase 24 volt motor that is unable to be burnt out; a programmable logic control with current sensing and durable solid state switching of the motor; chain drive with average tensile strength of 1950kg and a 12.7mm pitch; self-lubricating gearbox with steel cut gears (not nylon or cast) for increased durability with no intermediate belts or pulleys; an anodised aluminium replaceable tracking system; and a carriage assembly supported by glass fiber reinforced nylon track wheels with fully raced and sealed ball bearings. The operator must have positive electric braking to close the doors smoothly; fully adjustable speed control with independent settings for open, close and braking; automatic re-closing circuitry to ensure doors re-close if partially opened; intermediate selectable opening widths or climate control facility. The operator is to incorporate a failsafe device to open doors fully on power failure or on fire signal in accordance with the BCA section D2.19 and relevant Australian Standards; monitoring warning signal to indicate when the battery power is low; automatic reversing if obstructed during closing sequence with fully adjustable sensitivity settings; automatic stop and retry if obstructed during opening sequence at a predetermined programmable time and speed; dual sets of jamb fitting high gain (up to 15m) flush mounted safety beams (PE cells) that are resistant to sunlight. Actuation The operator is to be actuated by two DORMA microwave movement sensors as standard equipment; the sensors must be resistant against reflected sun light and have focusable area detection settings to reduce unnecessary actuations. The operator is to be covered by a two (2) years parts and twelve (12) months labour warranty from date of invoice.
    Especificaciones técnicas
    • ReferenciaEL301_BiParting_Wall-Hosted
    • Familia de productoDoors
    • Grupo de productosSliding Doors
    • TipoObjeto (objeto simple)
    • Día de publicación2020-02-25
    • Número de edición1
    Información relacionada
    • Material principalAluminio
    • Material secundarioVidrio
    • Diseñado enAustralia
    • Fabricado enAustralia
    Clasificación
    • Categoría BIMobjectPuertas - Puertas correderas

    Disponibilidad en regiones

    Asia Oceanía África
    Arabia Saudí
    Australia
    Egipto
    Baréin
    Fiyi
    Senegal
    Catar
    Nueva Zelanda
    Sudáfrica
    China
    Papúa Nueva Guinea
    Túnez
    Emiratos Árabes Unidos
    Vanuatu
    India
    Indonesia
    Jordania
    Kuwait
    Malasia
    Omán
    Singapur
    Turquía
    Vietnam
    Common.Footer.ValueProp.Image.AltText

    Aplicación de diseño para Revit

    Cargue familias directamente en su modelo de Revit con un solo clic

    Obtenga un lugar para acceder a nuevos objetos más fácilmente, almacene sus familias de Revit y colabore con su equipo.

    • Marca de verificaciónTrabaje directamente con los objetos BIM junto a Revit
    • Marca de verificación 2GB de almacenamiento en la nube: almacene su contenido de Revit
    • Marca de verificación Obtenga el LCA de carbono incorporado (A1-A3) directamente desde Revit