Dimensions and weight
River Bench seat STRAIGHT 950 - U20-49/RAK
Length: 95 cm
Width: 50 cm
Height: 6 cm
Armrest height: 23.5 cm
Backrest height: 36 cm
River Bench seat STRAIGHT 1900 - U20-49/RAK1900
Length: 190 cm
Width: 50 cm
Height: 6 cm
Armrest height: 23.5 cm
Backrest height: 36 cm
River Bench seat R1250 - U20-49/R1250
Length: 195 cm
Seat width: 50 cm
Height: 6 cm
Armrest height: 23.5 cm
Outer radius: 125 cm
River Bench seat R2500 - U20-49/R2500
Length: 194 cm
Seat width: 50 cm
Height: 6 cm
Armrest height: 23.5 cm
River Bench seat R6000 - U20-49/R6000
Length: 185 cm
Seat width: 50 cm
Height: 6 cm
Armrest height: 23.5 cm
River Bench seat R9000 - U20-49/R9000
Length: 169 cm
Seat width: 50 cm
Height: 6 cm
Armrest height: 23.5 cm
See Product Sheet - Outline for more information about the concrete benches.
| S:t Erik Concrete benches |
| 1. | U20-49/9813-090000 | S:t Eriks Outline Bench Straight 950 mm |
| 2. | U20-49/9813-190000 | S:t Eriks Outline Bench Straight 1900 mm |
| 3. | U20-49/9813-170900 | S:t Eriks Outline Bench Radius 1250 mm |
| 4. | U20-49/9813-180600 | S:t Eriks Outline Bench Radius 2500 mm |
| 5. | U20-49/9813-190200 | S:t Eriks Outline Bench Radius 6000 mm |
| 6. | U20-49/9813-190100 | S:t Eriks Outline Bench Radius 9000 mm |
| River Seats and accessories |
| 7. | U20-49/RAK | River Bench Seat straight 950 mm |
| 8. | U20-49/RYGG | Backrest for Straight Seat 950 mm |
| 9. | U20-49/RAK1900 | River Bench Seat straight 1900 mm |
| 10. | U20-49/RYGG1900 | Backrest for Straight Seat 1900 mm |
| 11. | U20-49/R1250 | River Bench Seat R1250 mm |
| 12. | U20-49/R2500 | River Bench Seat R2500 mm |
| 13. | U20-49/R6000 | River Bench Seat R6000 mm |
| 14. | U20-49/R9000 | River Bench Seat R9000 mm |
| 15. | U20-49/ARM | Armstöd till River Bänksits |
Append to product number
Wood and finish
E for oiled oak.
J for jatoba.
LIN for linax impregnated pine.
Metal surface finish
C for any color other than standard, starting cost added.
Standard colours
RAL 9005
Oiled oak
Jatoba
Linax impregnated pine
Materials and surface treatments
Pine
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
Jatoba - FSC-certified
Our FSC-labeled Jatoba is an untreated, very hard, and strong hardwood with a long shelf life. It has a brown color with black accent stripes that changes to a deep and rich red color over time.
Oak
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Wood oil
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Steel
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Electrogalvanized
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Powder coating
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Linax
Linax is a linseed oil-based impregnation that provides extra long durability in outdoor environments and corresponds to impregnation class AB. The impregnated wood turns gray over time, which means that it should be re-oiled if necessary. Use a linseed-based oil for impregnated materials.
After traditional impregnation according to NTR AB, the wood is boiled in a hot linseed oil with or without color pigments under vacuum. The oil is penetrated into the surface on all six sides, which reduces moisture absorption in the wood and gives a dimensionally stable product over time. The result is a dried product with good resistance to rot that also has long maintenance intervals. Linax-impregnated furniture is intended for outdoor environments only.
Assembly and placement
River Furniture system can be combined with S:t Erik's Outline concrete benches or other stone or concrete walls. Delivered unassembled with seats and concrete bench separately and then the seats are mounted with the wall stand and concrete screw.
Maintenance
Oiled oak
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil. Black stains on oiled oak can be removed with oxalic acid.
Jatoba
Jotoba basically requires no maintenance apart from regular wiping down.
Linax impregnated pine
Outdoor furniture requires oiling every 5 years and panel products and roofs require oiling every 12 years. Maintenance should be done with linseed oil varnish. It is important that the wood is clean and dry (max. 20% moisture content) before it is finished with oil. When washing, do not use high-pressure cleaners. Washing should be done with lukewarm water and then rinsed off with a water hose at normal pressure. Strong grease-dissolving agents should not be used, but washing should be done with a mild household detergent. Detergents containing bleach should also not be used.
The oil can be applied with a roller or brush. Too much oil can cause growth on the wood and give a sticky surface. Attacks by growth can also occur if the wood has not been sufficiently dry or cleaned before the oil is applied. Growth does not damage the wood and is relatively easy to remove, but has a tendency to return.
Powdercoated steel
Products that are powder-coated can be touch-up painted with alkyd paint.
Read more in our general maintenance advice at nola.se/en/care-and-maintenance