Pubblica i tuoi prodotti
MI-DU Distribution Unit
MIFAB

MI-DU Distribution Unit

MIFAB® Series MI-DU trap seal primer distribution unit is engineered to receive a metered amount of water from a trap seal primer and distribute the water equally to either two, three or four floor drain traps. Choose from either 1/2" or 5/8" compression connections by indicating suffix (-500) or 1/2" or suffix (-625) for 5/8". The lid of the distribution unit has the numbers 2", 3" and 4" marked on it. The body of the distribution unit has a guide marker on the top of the body. The numbers and the guide marker are positioned by removing the three screws in the lid of the unit and rotating the lid to match the appropriate numbers with guide marker to provide priming for the desired number of drains. The underside is marked with numbers 1-4 for ease in determining which ports will receive the water. Do not over torque the three lid screws when securing the lid back to the body. It is not necessary to install MIFAB’s distribution perfectly level. The unique design will distribute water uniformly when out of level up to 5 degree.
Voce di capitolato
  • SKUs: MI-DU-500, MI-DU-625
Specifiche tecniche
  • Rif. Unicomi-du-500-distribution-unit
  • Famiglia di prodottoTrap Seal Primers
  • Gruppo di famigliaOther
  • TipoDocumentazione (solo informazioni)
  • Data di pubblicazione2021-02-26
  • Numero di versione1
Relativo a
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectImpianto idraulico - Scarico

Disponibilità Regionale

Nord America
Stati Uniti
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit