製品の公開
AP275-200 Combination Flashing Light and Alarm Horn for Safety Stations
Guardian Equipment

AP275-200 Combination Flashing Light and Alarm Horn for Safety Stations

Google翻訳”,

AP275-200
安全ステーション用点滅灯と警報ホーンの組み合わせ

用途:安全ステーション向けの点滅灯と警報ホーンを組み合わせたユニット。洗眼器やシャワーが作動すると、点滅灯が点灯し、警報ホーンが大音量で鳴ります。交通量の多い場所、産業施設、周囲光量の少ない場所での使用に最適です。

設置方法:本機は複合型安全ステーションとの併用を想定して設計されており、ステーションの垂直配管、または本機に隣接する壁面に取り付けることができます。120ボルト、0.48アンペアの電源が必要です。

視覚信号:耐候性のある琥珀色の点滅灯(飛散防止レンズ付き)。

可聴信号:耐候性ホーンは、特徴的で緊急性の高い信号を発します。音量は10フィート(約3メートル)の距離で100dBにプリセットされています。ホーン前面の調整ネジで出力音量を調整できます。

流量スイッチ: 1-1/4インチIPS単極双投防水流量スイッチ。緊急ユニットへの給水ラインに設置します。洗眼器またはシャワーが作動すると、水の流れを感知します。流量スイッチは、T字継手を水平に、スイッチ本体を垂直に、最も近い継手から少なくとも6インチ離して設置する必要があります。流れの方向はスイッチ本体に表示されています。

取り付け:垂直パイプまたは壁面への取り付け用ブラケット、ジャンクションボックス、長さ5フィートのフレキシブルNEMA 4Xコードおよびコンセントが付属します。電気接続はお客様ご自身で行っていただきます。

品質保証:本製品は出荷前に完全に組み立てられ、配線され、工場でテスト済みです。

利用可能なオプション

  • HV:高電圧。本機は208~240VAC、50/60Hzに対応するように設計されています。
  • SW警報ホーンの消音スイッチ。

追加モデル

  • AP275-205は、監視システムへの接続用に双極双投フロースイッチを備えている点を除き、上記と同様です。緊急ユニットが作動すると、ライトとホーンが点灯し、遠隔監視場所に電気信号が送信されます。
仕様
  • Attribute / Specification FieldProduct Data Value
    ManufacturerGuardian Equipment
    Model NumberAP275-200
    Product TypeCombination Flashing Light and Alarm Horn System for Safety Stations
    Application ProfileEngineered for placement in high-traffic facilities, low-visibility zones, and vandal-prone spaces (e.g., educational environments). Instantly alerts coworkers when life safety drench fixtures are operating.
    Electrical Input Capacity120V AC, 50/60 Hz single-phase utility connection. Draws 0.48 Amps under full dual-signal operational load.
    Water Flow Switch1-1/4" IPS Single Pole, Double Throw (SPDT) waterproof flow switch featuring a 1-1/4" NPT female inlet. Designed to activate automatically when system demand hits 0.75 GPM (2.8 L/min) and reset when demand drops below 0.60 GPM (2.3 L/min).
    Flow Switch OrientationMust be installed directly in a horizontal water supply pipe run positioned upstream of the emergency safety station. The switch housing body must sit perfectly vertical and maintain at least 6" of linear clearance from the nearest pipe fitting or elbow.
    Visual Beacon SignalWeatherproof, high-visibility amber flashing strobe light sheltered under a high-impact, shatter-resistant protective lens module.
    Audible Horn SignalWeatherproof industrial alarm horn delivering a distinctive, urgent audio pattern. Factory preset output is measured at 100 dB at a distance of 10 feet. Includes an integrated mechanical front adjustment screw to dial volume output between 0 and 100 dB.
    Environmental ProtectionFully enclosed layout carrying a NEMA 4X / Weatherproof rating for rigorous dust, washdown, and outdoor industrial utility.
    Mounting ArchitectureSupplied with an universal modular bracket layout engineered for direct clamping around a vertical safety station support pipe or surface flush-mounting on an adjacent room wall.
    Wiring InfrastructureFurnished entirely pre-assembled, internal terminal-block wired, and factory hydrostatically/electrically system tested. Includes a weatherproof junction box and a 5-foot (1.5 m) flexible NEMA 4X power cord with a standard 3-prong grounded plug.
    Compliance & StandardsDesigned to facilitate total system alignment with OSHA facility standards and ANSI Z358.1 emergency signal advisory targets.
    Included ComponentsCombination beacon/horn unit, dual-use pipe/wall mounting bracket, 1-1/4" inline flow switch, 5 ft pre-wired power cord, mechanical testing inspection tag


    safety shower alarm, eyewash alarm unit, guardian equipment ap275-200, flashing light horn, combination safety alarm, emergency drench alarm, industrial strobe light, audible alarm horn, amber flashing beacon, 120v safety alarm, weatherproof junction box, nemas 4x alarm, inline flow switch, 1-1/4 flow switch, single pole switch, accident alert system, facility response alarm, high traffic safety, low ambient light, vandal resistant safety, audio visual alarm, adjustable decibel horn, emergency plumbing accessory, automated facility signal, remote assistance alarm, safety station monitor, factory wired alarm, horizontal line switch, pipe mount bracket, wall mount safety, industrial safety plumbing, osha compliant alarm, ansi z358.1 accessory, electrical safety control, commercial safety plumbing

技術仕様
  • Unique refap275-200-combination-flashing-light-and-alarm-horn-for-safety-stations
  • コレクションセットPlumbing
  • コレクションAudio-Visual Alarms & Flowswitches
  • タイプオブジェクト(1つのオブジェクト)
  • 公開日2026-05-04
  • エディション1
関連
  • 設計国アメリカ合衆国
  • 製造国アメリカ合衆国
識別情報
  • BIMobjectカテゴリ配管設備 - バルブ

対応地域

北米
アメリカ合衆国
Common.Footer.ValueProp.Image.AltText

Revit用デザインアプリ

ワンクリックでRevitモデルにファミリを直接ロード

新しいオブジェクトに簡単にアクセスし、Revitファミリを保存し、チームと共同作業できる場所を入手してください。

  • チェックマークRevitの横でBIMオブジェクトを直接操作
  • チェックマーク 2GBのクラウドストレージ - Revitコンテンツを保存
  • チェックマーク Revitから直接エンボディドカーボンLCA(A1-A3)を取得