제품 게시
F5E-Therm electronic thermostat mixer F5ET1015
F5E-Therm electronic thermostat mixer F5ET1015

    F5E-Therm electronic thermostat mixer F5ET1015

    F5E-Therm thermostatic mixer DN 15 as finished installation kit for in-wall installation in basic installation kit, for sanitary facilities. Opto-electronically controlled, for connection to hot water and cold water. Function block with integrated solenoid valve cartridge, thermostat and device for optional bypass solenoid valve cartridge, for program-controlled thermal disinfection. Thermostat with metal handle with adjustable and turn-proof temperature stop and option for manual thermal disinfection. Visible parts made of high-polished chromium-plated brass. Holding frame with profile seal, stainless steel cover plate 190 x 245 mm with covered screw fixing including sensor with control electronics, rosette, backflow preventer and strainers. Spout with laminar jet controller with integrated flow regulator 6.0 l/min. Projection 260 mm, depth adjustability 25 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control. Separate power supply via power supply unit 6.75 V / 12 V DC or AQUA 3000 open system accessories.
    사양
    • Type of mounting      In-wall installation with box
      Type of operation      Sensor operation
      Power supply connection      6,75 / 12 V DC / A3000 open
      Diameter nominal      DN 15
      Calculation flow rate cold water      0.07 liter per second
      Calculation flow rate hot water      0.07 liter per second
      Functional principle      Electronic self-closing
      Minimum flow pressure      1.00 bar
      Power consumption      1.50000
      Volume flow rate at 3 bar      0.10 liter per second
      Inlet size      G-3-4-B
      Type of mixing      Thermostat
      Material casing      Stainless steel
      Material fitting      Brass
      Sound insulation      No
      Spout projection      260.00 mm
      Surface finish casing Satin finished
      Surface finish fitting      Chromed
      Type of tap      In-wall tap
      Depressurised      No
      Thermal disinfection      Prepared for automatic thermal disinfection
      Protective shutdown      Yes
      Volume flow rate thermal disinfection at 3 bar      0.05 liter per seconds
      Default automatic hygiene flushing      24h after the last activity
      Position of power connection      Top
      Type of sensor      Opto-electronic sensor
      Hygiene flushing      Yes

    기술 사양
    • 특징 참조2030038683
    • 제품군Taps
    • 제품분류Electronic taps
    • 유형개체 (단일 개체)
    • 게시일2020-03-24
    • 에디션 넘버1
    • 높이(mm)245
    • 너비(mm)190
    관련성
    • 주 재료스테인레스강
    • 부 재료놋쇠
    • 설계국가독일
    • 제조국가독일
    • 순 중량(Kg)5
    분류
    • BIMobject 카테고리위생 - 수도꼭지
    • Uniclass 2015 코드Pr_40_20_87_98
    • Uniclass 2015 설명Washbasin taps

    지역 가용성

    아시아 유럽 오세아니아 북미 아프리카
    아랍에미레이트
    네덜란드
    오스트레일리아
    미국
    남아프리카
    독일
    캐나다
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    벨기에
    세르비아
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아일랜드
    에스토니아
    영국
    오스트리아
    우크라이나
    이탈리아
    체코 공화국
    크로아티아
    폴란드
    프랑스
    핀란드
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득