เผยแพร่สินค้าของคุณ
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
    ARDEX

    ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar

    Weather resistant tile adhesive with ARDEX Weather Proof Technology

    ARDEX WEATHER PROOF TECHNOLOGY: Ready for any weather! High initial strength even at low temperatures, highest frost-thaw change resistance, long processing time even at high temperatures and after only 2 hours drip-proof. With the innovative ARDEX X 90 OUTDOOR MICROTEC3 flexible adhesive you are well prepared for the unpredictability of the weather. Because when working outdoors, the weather conditions play a crucial role. But these are often unpredictable. That's why working outdoors is always associated with a certain risk. Equipped with the new ARDEX WEATHER PROOF TECHNOLOGY, ARDEX X 90 OUTDOOR offers maximum installation safety even in difficult weather conditions. Furthermore, ARDEX X 90 convinces with excellent processing properties such as fully-saturated embedding without fluid bed behavior and a variable consistency setting. ARDEX X 90 OUTDOOR meets the requirements C2 FTE S1 according to EN 12004/12002 and is very low emission EC 1 PLUS R according to GEV EMICODE.

    Cool weather does not provide the ideal conditions for laying tiles and slabs on balconies and terraces. However, laying under these conditions is often unavoidable. ARDEX X 90 OUTDOOR is a cementitious laying mortar which fulfills the properties of a fast adhesive even at cool temperatures and can be walked on and supplied after approx. 3 hours. Thus, the ARDEX X 90 OUTDOOR offers high composite security even at low temperatures. In addition, ARDEX X 90 is equipped with the new MICROTEC3 technology and exceeds the C2 freeze-thaw change requirements according to EN 12004 many times over. So even frequent temperature changes around the freezing point can not damage the adhesive.

    It often happens that when laying balconies and terraces very warm temperatures prevail. These can be air, but also underground temperatures. Conventional instant adhesives are even faster, and therefore hold a very high risk potential for later damage by a very short processing and insertion time. Thanks to its special formulation, the ARDEX X 90 OUTDOOR retains a high processing time, even at high temperatures. The covering can thus be laid comfortably and safely even at high temperatures.

    No damage from heavy rainfall. Even in the most glorious weather and sunshine, it can happen that during laying on balconies and terraces, thunderstorms and rain showers. Such sudden and unexpected showers can lead to excessive flushing of various constituents in the still fresh adhesive during the setting phase and thus permanently disrupt or weaken the adhesive bond. After only 2 hours, the ARDEX X 90 OUTDOOR is resistant to showers and driving rain, providing a further safety component for damage-free outdoor installation.

    Product Highlights:

    • Fast setting even at low temperatures
    • Highest frost-thaw change resistance
    • Driving rain-proof after two hours 
    • Long processing time even at high temperatures 
    • Walkable after approx. 3 hours
    สเปคสินค้า
    • Technical specifications

      bulk weight
      approx. 1.10 kg / l

      fresh weight
      approx. 1.60 kg / l

      Processing time at + 20 ° C
      approx. 60 min

      Working time
      approx. 30 min (measured on fresh mortar)

      Accessibility at + 20 ° C
      after approx. 3 h

      underfloor heating fitness
      Yes

      EMICODE
      EC1
       
      packing
      Bags with 25.00 kg net

      storage
      Can be stored in dry rooms for approx. 12 months in the original sealed container.

      Mixing ratio
      approx.  8.50 l water:  25.00 kg  ARDEX X 90 OUTDOOR

      Correction time
      approx. 15 min - 20 min

      GISCODE
      ZP 1 = cementitious product

      Bond strength
      for stoneware tiles after 28 days
      dry, wet approx. 1.0 - 2.0 N / mm 2
      warm approx. 1.0 - 1.5 N / mm 2
      Frost-thaw change 1.0 - 1.5 N / mm 2

      material requirements
      approx. 1.10 kg / m² of powder with toothing 3 x 3 x 3 mm
      approx. 2.10 kg / m² powder with toothing 6 x 6 x 6 mm
      approx. 2.60 kg / m² powder with toothing 8 x 8 x 8 mm
      approx. 3.20 kg / m² powder with toothing 10 x 10 x 10 mm
      approx. 4.60 kg / m² of powder with MICROTEC toothing 12 x 10 x 15 mm

      Joints on the wall
      After 2 h

    สเปคสินค้าด้านเทคนิค
    • Unique ref.ardex-x-90-outdoor
    • Product familyTile & Stone Installation System
    • กลุ่มผลิตภัณฑ์Microtec Rapid Set Flexible Tile and Stone Mortar
    • ประเภทวัตถุ (วัตถุชิ้นเดียว)
    • วันที่เผยเเพร่2019-10-07
    • หมายเลขฉบับ1
    ลิงค์
    สิ่งที่เกี่ยวข้อง
    • ออกเเบบโดยสหรัฐอเมริกา
    การจำแนกประเภท
    • หมวดหมู่ BIMobjectพื้น - กระเบื้อง
    • IFC classificationFloor
    • UNSPSC nameStone or tile flooring
    • UNSPSC code30161706
    • Uniclass 2015 CodeEF_30_20
    • Uniclass 2015 DescriptionFloors
    • CSI MasterFormat 2014 Code09 90 00
    • CSI MasterFormat 2014 TitlePainting and Coating
    • OmniClass Number23-15 17 13 13
    • OmniClass TitleTile Flooring
    • CSI UniFormat II CodeB1010
    • CSI UniFormat II TitleFloor Construction

    พื้นที่การขาย

    อเมริกาเหนือ ยุโรป เอเชีย
    กรีนแลนด์
    เช็กเกีย
    ไทย
    แซ็ง-บาร์เตเลมี
    เดนมาร์ก
    สิงคโปร์
    กวาเดอลูป
    โปแลนด์
    กัวเตมาลา
    ฝรั่งเศส
    กือราเซา
    เยอรมนี
    เกรเนดา
    รัสเซีย
    คอสตาริกา
    สวีเดน
    คิวบา
    ออสเตรีย
    เครือรัฐดอมินีกา
    อิตาลี
    แคนาดา
    ไอร์แลนด์
    จาเมกา
    ซินต์มาร์เติน
    เซนต์คิตส์และเนวิส
    เซนต์ลูเซีย
    เซนต์วินเซนต์และเกรนาดีนส์
    แซงปีแยร์และมีเกอลง
    แซงมาร์แตง
    ตรินิแดดและโตเบโก
    นิการากัว
    เนเธอร์แลนด์แคริบเบียน
    บาร์เบโดส
    บาฮามาส
    เบลีซ
    เบอร์มิวดา
    ปานามา
    เปอร์โตริโก
    มอนต์เซอร์รัต
    มาร์ตินีค
    เม็กซิโก
    สหรัฐอเมริกา
    สาธารณรัฐโดมินิกัน
    หมู่เกาะเคย์แมน
    หมู่เกาะเติกส์และหมู่เกาะเคคอส
    หมู่เกาะบริติชเวอร์จิน
    หมู่เกาะเวอร์จินของสหรัฐ
    อารูบา
    เอลซัลวาดอร์
    แองกวิลลา
    แอนติกาและบาร์บูดา
    ฮอนดูรัส
    เฮติ
    Common.Footer.ValueProp.Image.AltText

    แอปออกแบบสำหรับ Revit

    ดาวน์โหลด Design App.Common.Title

    รับพื้นที่เพื่อเข้าถึงวัตถุใหม่ๆ ได้ง่ายขึ้น จัดเก็บ Revit families ของคุณ และทำงานร่วมกับทีมของคุณ

    • เครื่องหมายถูกทำงานโดยตรงกับวัตถุ BIM ข้าง Revit
    • เครื่องหมายถูก พื้นที่จัดเก็บข้อมูลบนคลาวด์ 2GB - จัดเก็บเนื้อหา Revit ของคุณ
    • เครื่องหมายถูก รับ LCA คาร์บอนในตัว (A1-A3) โดยตรงจาก Revit