Industrial Control Damper - Thermally Broken Frame - Broken Airfoil Parallel Blade - TICD-51BF

Thermally Broken Frame Control Damper
Broken Airfoil Blade

The TICD-51BF control damper employs thermally insulated and broken aluminum airfoil blades and a thermally broken rugged channel frame to eliminate the transfer of heat or cold penetration and reduce condensation. The TICD51BF damper provides extreme low leakage as well as exceptional air control in medium to high pressure and velocity applications. Both models comply with the IECC (International Energy Conservation Code) with a leakage rating of 3 cfm/ft² @ 1 in. wg. (0.015 m³/s/m² @ 0.25 kPa) or less.

Voce di capitolato

Standard Construction
Frame: 4" x 1" x 0.081" (102 x 25 x 2) top/bottom and
4" x 1-1/8" x 0.081" (102 x 29 x 2) jambs, extruded aluminum channel.
Blades: 6" (152) heavy gauge, dual wall thermally insulated and broken extruded aluminum - airfoil. Parallel.
Axles: 1/2" (13) diameter plated steel hex.
Linkage: Concealed in frame.
Bearings: Synthetic.
Seals: Silicone - blade edge and jambs. Mechanically fastened.
Control Shaft: 1/2" x 6" (13 x 152) round drive axle with outboard shaft support bracket and bearing supplied for field installation. Factory installed 3/4" (19) diameter jackshaft on all multiple section dampers more than 2 sections wide.
Minimum Size: 6" x 6.5" (152 x 165)
Maximum Size:
Single Section: 60" x 72" (1524 x 1829)
Multiple Section: Unlimited

Ratings
Temperature: -70^oF to 212^oF (-57^oC to 100^oC)
Leakage Class: 1A and 1 (see table on product sheet)

Specifiche tecniche

Rif. UnicoIndustrial-Control-Damper-Thermally-Broken-Frame-Broken-Airfoil-Parallel-Blade-TICD-51BF
Famiglia di prodottoHVAC
Gruppo di famigliaAir Control Dampers
TipoOggetto (oggetto singolo)
Data di pubblicazione2024-07-16
Numero di versione1

Links

Link al Prodottohttps://www.pottorff.com/product/details/352

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Canalizzazione
Codice Uniclass 2015Pr_65_65_24
Descrizione Uniclass 2015Duct dampers
Codice CSI MasterFormat 201423 33 13.13
Titolo CSI MasterFormat 2014Volume-Control Dampers
Numero OmniClass23-33 29 37
Titolo OmniClassVolume Control Dampers

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago