Industrial Control Damper - Thermally Insulated - Broken Airfoil Parallel Blade - TICD-51

Thermally Insulated Control Damper
Broken Airfoil Blade

The TICD-51 control dampe employs thermally insulated and broken aluminum airfoil blades and a rugged channel frame to eliminate the transfer of heat or cold penetration and reduce condensation. The TICD-51 damper provides extremely low leakage and exceptional air control in medium to high pressure and velocity applications. Both models comply with the IECC (International Energy Conservation Code) with a leakage rating of 3 cfm/ft 2 @ 1 in. wg. (0.015 m3 /s/m2 @ 0.25 kPa) or less.

Voce di capitolato

Standard Construction
Frame: 4" x 1" x 0.081" (102 x 25 x 2) top/bottom and
4" x 1-1/8" x 0.081" (102 x 29 x 2) jambs, extruded aliminum channel.
Blades: 6" (152) heavy gauge, dual wall thermally insulated and broken extruded aluminum - airfoil. Parallel.
Axles: 1/2" (13) diameter plated steel hex.
Linkage: Concealed in frame.
Bearings: Synthetic.
Seals: Silicone - blade edge and jambs. Both are mechanically fastened.
Control Shaft: 1/2" x 6" (13 x 152) round drive axle with outboard shaft support bracket and beating supplied for field installation. Factory installed 3/4" (19) diameter jackshaft on all multiple section dampers more than 2 sections wide.
Minimum Size: 6" x 6.5" (152 x 165)
Maximum Size:
Single Section: 60" x 72" (1524 x 1829)
Multiple Sections: Unlimited
Ratings
Temperature: -45^oF to 212^oF (-43^oC to 100^oC)
Leakage Class: 1A and 1 (see chart on product sheet)

Specifiche tecniche

Rif. UnicoIndustrial-Control-Damper-Thermally-Insulated-Broken-Airfoil-Parallel-Blade-TICD-51
Famiglia di prodottoHVAC
Gruppo di famigliaAir Control Dampers
TipoOggetto (oggetto singolo)
Data di pubblicazione2024-07-16
Numero di versione1

Links

Link al Prodottohttps://www.pottorff.com/product/details/350

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Canalizzazione
Codice Uniclass 2015Pr_65_65_24
Descrizione Uniclass 2015Duct dampers
Codice CSI MasterFormat 201423 33 13.13
Titolo CSI MasterFormat 2014Volume-Control Dampers
Numero OmniClass23-33 29 37
Titolo OmniClassVolume Control Dampers

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago