HomeWorks DALI-2® Power Module

Power 

• 100 V~ 50 / 60 Hz 150 mA 

• 120 V~ 50 / 60 Hz 120 mA 

• 220-240 V~ 50 / 60 Hz 80 mA 

• 277 V~ 50 / 60 Hz 70 mA • DALI® 

• Lightning strike protection meets ANSI / IEEE standard 62.31-1980. Can withstand voltage surges of up to 6000 V~ and current surges of up to 3000 A 

• DALI® Bus Output: 16 V- 128 mA guaranteed supply current, 250 mA maximum supply current per bus 

Standards 

• Lutron Quality Systems registered to ISO 9001:2015. 

• IEC 60669-2-5

• DALI-2®  certified - IEC 62386-101 and IEC62386-103 ed.2 

• NOM Certified 

• ICES-3(B) / NMB-3(B) 

• FCC Part 15 

• cULus Listed 

• UL® 924

Environment 

• Ambient temperature operating range: 32 ºF to 104 ºF (0 ºC to 40 ºC) 

• Relative humidity: less than 90% non-condensing 

• For indoor use only 

Terminals 

• Mains wiring: 18 AWG to 12 AWG (1.0 mm2 to 4.0 mm2)

• DALI® bus wiring: 20 AWG to 12 AWG (0.5 mm2 to 4.0 mm2) 

• QS link wiring: 20 AWG to 12 AWG (0.5 mm2 to 2.5 mm2) 

• CCI and CCI emergency wiring: 20 AWG to 16 AWG (0.5 mm2 to 1.5 mm2) 

Mounting 

• Intended to mount within an IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail and dead cover 

• 9 DIN modules (161.7 mm) 

• For more information on mounting and installation in panels with integrated DIN rail see the DIN Rail Best Practices Application Note (P / N 048466) at www.lutron.com 

DALI® Bus 

• The DALI® Power Module has an integrated bus power supply that provides a guaranteed current of 128 mA (maximum of 250 mA) 

• The DALI® Power Module is a DALI® single master controller and therefore no other controller or sensor may exist on the same DALI® bus 

• Some DALI® loads may be polarity sensitive; refer to individual manufacturers’ specifications for proper connection to the DALI® bus 

• Short circuit protection with automatic re-start (610 ms shutdown delay with a 3 second re-start followed by 800 ms shutdown delay with 160 ms retry time) 

Troubleshooting and Maintenance Features 

• Maintains redundant memory of control gear programming for ease of single- and multi-control gear replacement 

• After installation, “TEST” button verifies DALI® wiring on all fixtures